« previous next »
Pages: [1]

Author Topic: Nifty nocker  (Read 3252 times)

0 Members and 1 Guest are viewing this topic.

Offline JEB

  • Member
  • Posts: 1,735
Nifty nocker
« on: December 16, 2013, 08:38:59 pm »
Looking for a Nifty Nocker that was sold by Raptor Archery.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Nifty nocker
« Reply #1 on: December 16, 2013, 09:35:45 pm »
What is it?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Grasshopper Mouse

  • Guest
Re: Nifty nocker
« Reply #2 on: December 16, 2013, 10:51:03 pm »
Pat, it's a metal block that fits over the end of a shaft and has slots to guide saw cuts for an insert and for the nock cut itself.

Guy
Logged

Offline JEB

  • Member
  • Posts: 1,735
Re: Nifty nocker
« Reply #3 on: December 16, 2013, 11:23:04 pm »
As grasshopper wrote.  It works  good for self nocking arrows .
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Nifty nocker
« Reply #4 on: December 16, 2013, 11:40:16 pm »
I made ne a few years ago by drilling a 3/8" hole through a piece of 2x4 then sawed it in half cutting through the 3/8" hole then added bolts and wing nuts to hold the shaft in. I cut a slot for nocks and one a bit longer for trade points. I now do self nocks free handed.  ;D
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline steve b.

  • Member
  • Posts: 999
Re: Nifty nocker
« Reply #5 on: December 17, 2013, 12:01:20 am »
I have one.  I've never used it.  I have the hardware and the hardwood inserts that came with the kit, and the instructions. 
Logged

Offline JEB

  • Member
  • Posts: 1,735
Re: Nifty nocker
« Reply #6 on: December 19, 2013, 11:06:40 pm »
Still looking!!
Logged

Offline JEB

  • Member
  • Posts: 1,735
Re: Nifty nocker
« Reply #7 on: December 25, 2013, 07:19:21 am »
ttt
Logged
Pages: [1]
« previous next »