Author Topic: Curious method for checking tiller...  (Read 8380 times)

0 Members and 1 Guest are viewing this topic.

Offline Capt

  • Member
  • Posts: 110
Curious method for checking tiller...
« on: September 07, 2013, 07:38:15 pm »
Weird method i just thought up while re tillering my bow..

I was looking at some profiles of my bow at full draw and started checking the curve with a roll of masking tape as a guide...

Bow Pic on my ipad taking pic with iPhone to load up here for criticism.....




Offline bubby

  • Member
  • Posts: 11,054
Re: Curious method for checking tiller...
« Reply #1 on: September 08, 2013, 12:22:50 am »
lots of guys will do that with a can or plate, Del uses a cd if I remember right
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Capt

  • Member
  • Posts: 110
Re: Curious method for checking tiller...
« Reply #2 on: September 08, 2013, 01:14:42 am »
So how does the tiller look? I want honesty.. This is my first time building a bow so I'm looking to learn from constructive criticism?..

Offline adb

  • Member
  • Posts: 5,339
Re: Curious method for checking tiller...
« Reply #3 on: September 08, 2013, 11:48:44 am »
Personally, I don't use a tiller stick and I would never leave a bow at full draw on a tiller stick like that. I only leave my bows at full draw on the tiller tree long enough to see what I want to see.
What front profile does your bow have? Also, why are your tips so long? Extra tip material makes your bow slower and gives it more hand shock.

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Curious method for checking tiller...
« Reply #4 on: September 08, 2013, 04:27:30 pm »
There is an old adage that a bow full drawn is 7/8ths broken.  We've had enough arguement on that over the years to fill a series of books, the the spirit of the adage says a lot.  The longer it is at draw the thinner that 1/8th gets.  ADB isn't steering you wrong!

The roll of masking tape is yet another variation on a long theme.  Didja know that the bottom of a bottle or can does the same?  However, I have found that too many checks of the tiller while tilting a bottle or can, often ruins the tiller.   ::)  Not sure what it is in the process that causes things to go wonky, maybe I need to do more research. 

Never the less, any trick that helps you turn out a workable bow or improves your technique is something worth sharing.
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: Curious method for checking tiller...
« Reply #5 on: September 09, 2013, 03:51:19 pm »
best way to check the tiller is to take a picture, then you can look at fulldraw all day long.

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: Curious method for checking tiller...
« Reply #6 on: September 09, 2013, 03:52:43 pm »
tiller looks good but adb is right, chop those tips down.

Offline Capt

  • Member
  • Posts: 110
Re: Curious method for checking tiller...
« Reply #7 on: September 09, 2013, 03:59:58 pm »
tiller looks good but adb is right, chop those tips down.

Already did it... Here are a couple of pics of new tips and full draw.... >:D


Offline adb

  • Member
  • Posts: 5,339
Re: Curious method for checking tiller...
« Reply #8 on: September 09, 2013, 05:24:05 pm »
That looks better! And BOWMAN53 is right... take a pic at full draw and you can critique it 'til your eyes cross!

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: Curious method for checking tiller...
« Reply #9 on: September 13, 2013, 08:17:39 pm »
I use a quarter on my phone
Nothing ventured nothing gained

Offline 4dog

  • Member
  • Posts: 1,610
Re: Curious method for checking tiller...
« Reply #10 on: September 14, 2013, 12:53:34 am »
Quarter on your phone...genius!
"SET" is always there !!!

Offline Joec123able

  • Member
  • Posts: 1,769
Re: Curious method for checking tiller...
« Reply #11 on: September 14, 2013, 06:32:49 pm »
Like what has already been said, DON'T LET YOUR BOW SIT ON THE TREE DRAWN ALL THE WAY BACK THAT CAUSES EXCESSIVE STRING FOLLOW AND COULD BREAK IT. Don't do it. Ive already done it my self let it sit for 30 seconds and BOOM! Exploded on the tree
I like osage

Offline DuBois

  • Member
  • Posts: 2,020
Re: Curious method for checking tiller...
« Reply #12 on: December 16, 2013, 01:24:49 am »
I found myself using the brim of my cap on one bow a while back. Mostly to see how even the limbs looked in the early tiller.

Offline sleek

  • Member
  • Posts: 6,764
Re: Curious method for checking tiller...
« Reply #13 on: December 16, 2013, 02:36:22 am »
The grain I see at your tips has me worried. Board bow? What type wood? Can we see a pic of the back?
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others