A big thanks again to all you guys for the responses.
@blackcoyote & Grady; I soaked the bark for a couple days in water, glued it on with titebond III and wrapped with an ace bandage. I did
put a thin size coat of the glue on both surfaces the day before glue on. I pealed some of the inner bark off to try and get the outer bark
thin before glueing on and after glue was dry I hit it all with some medium steel wool which took off some layers of the top bark that were loose down to a sound bark surface. What remained is probably no thicker that grocery bag paper. Probably better ways to do it, don't know. This was my first attempt at it and it turned out OK
I have some left over and I'll do another in the future, also have some nice cherry bark from Carson at echo that I'm wanting to put on a bow real bad.
