« previous next »
Pages: [1]

Author Topic: sinew wrap question  (Read 2391 times)

0 Members and 2 Guests are viewing this topic.

Offline JEB

  • Member
  • Posts: 1,735
sinew wrap question
« on: June 04, 2013, 08:06:10 am »
Made my second self bow out of iron wood (HH).  It has a small crack issue on one of the limbs.  I took the bow to Marshall and asked  the experts about the limb , Chris, Chris, Matt and Marty and it was concluded that I need to wrap the bad spot with sinew.  Do I wrap the bow BEFORE I put a finish on it or AFTER the finish is applied?

and what glue should I use?
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: sinew wrap question
« Reply #1 on: June 04, 2013, 08:07:35 am »
I always wrap before ,then seal over to water proff.
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline MWirwicki

  • Member
  • Posts: 2,234
  • The wood speaks to you; Listen with your eyes. GSD
Re: sinew wrap question
« Reply #2 on: June 04, 2013, 08:56:52 am »
....What Pappy said
Logged
Matt Wirwicki
Owosso, MI

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: sinew wrap question
« Reply #3 on: June 04, 2013, 08:57:35 am »
Jon I do the same thing Pappy does.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline YewArcher

  • Member
  • Posts: 415
Re: sinew wrap question
« Reply #4 on: June 04, 2013, 11:45:26 am »
When I do wraps I do them in the middle of finishing. In other words if I was using a Tru-Oil finish I would do a few coats of finish, wait for it to cure, add the wraps and then proceed with the final finish coats. That way (for what its worth if anything at all) I am sure the bow is fully sealed and finished under warps.

Steve
Logged

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: sinew wrap question
« Reply #5 on: June 04, 2013, 12:22:43 pm »
  Fill it with glue for get it. Shoot it like it is untill it's finished. Then build another bow. Personal I can't stand to see a warp thats not surpose to be there.
  I never fix %$#@ up's it makes it all right to mess up. Learn from your misstakes.Even if it is your faught. If it's not it sounds like a drying crack if it's not a run off or get it.
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline JEB

  • Member
  • Posts: 1,735
Re: sinew wrap question
« Reply #6 on: June 04, 2013, 09:18:32 pm »
Thanks to all.
Logged
Pages: [1]
« previous next »