« previous next »
Pages: [1]

Author Topic: finished my first bow  (Read 2021 times)

0 Members and 1 Guest are viewing this topic.

Offline ohiocountryboy

  • Member
  • Posts: 57
finished my first bow
« on: May 05, 2013, 01:06:20 am »
After all the hard work many many broken Bows i finally made one worthy of being called a hunting bow it is 58" ntn 50# @ 28" sinew and rattle snake skin backed.
Logged

Offline ohiocountryboy

  • Member
  • Posts: 57
Re: finished my first bow
« Reply #1 on: May 05, 2013, 01:07:52 am »
Hang on having picture posting problems
Logged

Offline DarkSoul

  • Member
  • Posts: 1,315
    • Orion Bows
Re: finished my first bow
« Reply #2 on: May 05, 2013, 08:12:01 am »
Reaching a drawlength of 28" with a length of only 58" is quite an achievement, even with sinew!

Looking forward to the pics. Upload pics directly to www.tinypic.com and copy-paste the [IMG ]-url into the message here.
Logged
"Sonuit contento nervus ab arcu."
Ovid, Metamorphoses VI-286

Offline ohiocountryboy

  • Member
  • Posts: 57
Re: finished my first bow
« Reply #3 on: May 05, 2013, 05:56:44 pm »
Logged

Offline ohiocountryboy

  • Member
  • Posts: 57
Re: finished my first bow
« Reply #4 on: May 05, 2013, 06:09:14 pm »






Logged

Offline ohiocountryboy

  • Member
  • Posts: 57
Re: finished my first bow
« Reply #5 on: May 05, 2013, 06:11:35 pm »
Logged

Offline ohiocountryboy

  • Member
  • Posts: 57
Re: finished my first bow
« Reply #6 on: May 05, 2013, 06:13:07 pm »
Logged

Offline ionicmuffin

  • Member
  • Posts: 1,787
Re: finished my first bow
« Reply #7 on: May 05, 2013, 06:31:09 pm »
the top limb looks like what i did with my first bow. its hinging as far as i can see, but since its finished its not worth redoing it. hows the flight pattern? is there a lot of hand shock? it seems like the limbs would be out of sync because of a mismatched tiller.
Either way, that's very impressive for your first hunter weight bow, and like darksoul said its an accomplishment to get that draw length out of that short a bow for your first even with sinew. nice job! keep making them!
Logged
Amo innectis arcus- I love crafting bows (latin)

Offline Slackbunny

  • Member
  • Posts: 866
Re: finished my first bow
« Reply #8 on: May 05, 2013, 07:23:48 pm »
Very nice, especially for a first bow. Wish my first looked that good!
Logged

Offline Eric Krewson

  • Member
  • Posts: 5,432
Re: finished my first bow
« Reply #9 on: May 05, 2013, 08:54:26 pm »
Your workmanship is very good, tillering, well, sinew may keep it together in spite of the hinges.

Take a good look at your limbs, not much bending from the handle to mid limb on both limbs then lots and lots of bending.

I will send you a tillering gizmo if you want one. It will help you get the whole limb bending without hinges.

By the way, my first bow was a sinew backed osage bow made from an osage board. My tillering was so bad the bow blew after about 30 shots. Not even sinew could protect it from my sorry workmanship.

Another thing I do is wait on backing a bow with skins until I have it completely done, shot in(about 1000 shots) and am sure it will hold together.
Logged

Offline dmc

  • Member
  • Posts: 136
Re: finished my first bow
« Reply #10 on: May 05, 2013, 08:56:01 pm »
I like the shape of the handle, and who doesn't like the look of skins? Nice job. Congrats.
Logged
Carpe Diem- Seize the Day!!

Offline Red Tailed Hawk

  • Member
  • Posts: 75
Re: finished my first bow
« Reply #11 on: May 05, 2013, 09:07:14 pm »
Congrats on your first shooter. Enjoy this one and they will get better as you go.
Logged
Pages: [1]
« previous next »