Author Topic: Harvesting Pine Pitch  (Read 15308 times)

0 Members and 1 Guest are viewing this topic.

Offline Friar

  • Member
  • Posts: 5
Harvesting Pine Pitch
« on: March 11, 2013, 05:07:43 pm »
Does anybody have a good reference explaining an efficient way to gather pine pitch?  Or could someone talk me through it?  I'm hoping to make my first batch of glue.

Thanks!  Really am loving the community y'all have built, appreciate y'all making it open and passing things on.

Offline TRACY

  • Member
  • Posts: 4,523
Re: Harvesting Pine Pitch
« Reply #1 on: March 11, 2013, 06:24:18 pm »
It is what it is - make the most of it!    PN500956

Offline Friar

  • Member
  • Posts: 5
Re: Harvesting Pine Pitch
« Reply #2 on: March 13, 2013, 03:35:48 am »
Thanks Tracy - good information.

But what about effective methods of gathering pine resin off the trees in preparation for making the glue?

Appreciate the help

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Harvesting Pine Pitch
« Reply #3 on: March 13, 2013, 05:04:13 pm »
Friar......It's a timely question that you ask there.Spring is coming soon here.I've had luck just cutting off a limb of a pine tree close to the trunk and within a little time the sap will start to run out.Others on here might have different methods that work but that works for me.
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline Friar

  • Member
  • Posts: 5
Re: Harvesting Pine Pitch
« Reply #4 on: March 15, 2013, 02:46:59 am »
Thanks Beadman!

Offline lostarrow

  • Member
  • Posts: 1,348
Re: Harvesting Pine Pitch
« Reply #5 on: March 15, 2013, 09:41:44 am »
"v" shaped notch  with a container tied under it  . Small pine trees with the soft smooth bark are easiest. Don't remove the pitch from the wound itself,That's what will keep the bugs from getting in and killing the tree. If you leave a bit of the bark at the bottom of the tree sticking out like a tag and sloped down, it should direct the pitch away from the tree and into your container. Kind of like a syrup spile .

Offline Marks

  • Member
  • Posts: 673
Re: Harvesting Pine Pitch
« Reply #6 on: March 15, 2013, 03:30:54 pm »
try youtube search. I pic is worth a thousand words and a video is worth a thousand pics.

Offline Friar

  • Member
  • Posts: 5
Re: Harvesting Pine Pitch
« Reply #7 on: March 18, 2013, 01:54:16 pm »
That's great info LostArrow - really appreciate it! 

And thanks Marks - I've been doing just that and love how much else I learn through the videos and the suggested videos

Offline Friar

  • Member
  • Posts: 5
Re: Harvesting Pine Pitch
« Reply #8 on: March 19, 2013, 01:10:46 pm »
This is one of the better articles I found:

http://www.wikihow.com/Tap-a-Pine-Tree

Offline Thesquirrelslinger

  • Member
  • Posts: 1,245
Re: Harvesting Pine Pitch
« Reply #9 on: March 25, 2013, 03:07:24 am »
Nice. I usually just go around and pick up the resin globs hanging off of the tree with a stick.
"Insanity is doing the same thing over and over again and expecting different results"

Offline anasazi

  • Member
  • Posts: 144
Re: Harvesting Pine Pitch
« Reply #10 on: June 04, 2013, 03:47:29 am »
I tend to gather the mostly dry pitch. There is usialy tones of it around camp grounds plenty of damaged trees there.any tree with bark beetles usialy has big globs that are easy to get. Best haul i got was from a section flattened by a micro burst or something and i came out with almost a gallon of dry pitch from downed trees.

Offline RedBear1313

  • Member
  • Posts: 105
Re: Harvesting Pine Pitch
« Reply #11 on: April 27, 2014, 10:37:17 am »
Time is how you harvest pitch.    By investing time, while you hike and hunt in the woods keep your eyes peeled.

OR look around cultivated areas like apartment complexes, schoolgrounds, etc.

That's where I FINALLY found a tree that gave me a very good amount of pitch.

It was litterally dripping everywhere from it in HUGE amounts.

So I promptly took every globe I could grab, stuffed a couple mason jars with it, and then went ahead and made some pine pitch bee's wax for my strings.
Hold on to what you can't remember, make sense of what you can't decipher.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Harvesting Pine Pitch
« Reply #12 on: April 27, 2014, 04:05:44 pm »
I like to find old wounds and pic the hard pitch off of it.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bowtarist

  • Member
  • Posts: 3,503
  • Primitive Archer Subscription Number PM103651
Re: Harvesting Pine Pitch
« Reply #13 on: April 30, 2014, 12:05:25 pm »
I like a harder pitch too. Or you can cook it down to harden it. If you use runny sap you'll end up with soft glue. I usually go to a pine woods and collect off natural wounds. It's not hard to cook it down though, but be careful it's real flammable.  Have fun, dp
(:::.)    Osage music played daily. :)

Offline RedBear1313

  • Member
  • Posts: 105
Re: Harvesting Pine Pitch
« Reply #14 on: April 30, 2014, 01:37:45 pm »
Just watched a good vid on a decent way of cleaning it up in the field last night.

I'll add and edit it to this post when I get a minute to go find it again.

Hold on to what you can't remember, make sense of what you can't decipher.