« previous next »
Pages: [1] 2

Author Topic: First knife  (Read 5065 times)

0 Members and 1 Guest are viewing this topic.

Offline osage outlaw

  • Member
  • Posts: 11,962
First knife
« on: February 27, 2013, 09:53:43 pm »
This is my first attempt at making a knife.  It is made from a used bandsaw blade .035" thick.  Because it is thin, I didn't grind a bevel on it.  That is something I'm going to have to learn when I get some thicker metal.  The handle is made from a scrap of red oak I had under my work bench.  The pins are aluminum brazing wire.  I used tru-oil to finish it.  I'm not sure if that is the best choice or not but that is all I had.  I have a sheath cut out for it.  I just need to stitch it together.  I'm giving the knife to the maint. supervisor at work.  He started saving the used blades for me.

I have a question for the knife makers, what prevents the knife from cutting the stitching on the inside of the sheath?


Logged
I started out with nothin' and I still got most of it left

Offline TRACY

  • Member
  • Posts: 4,523
Re: First knife
« Reply #1 on: February 27, 2013, 10:11:00 pm »
Hey Clint, that turned out mighty nice!

Tracy
Logged
It is what it is - make the most of it!    PN500956

Offline Frawg

  • Member
  • Posts: 282
  • Mayan Apocalypse Survivor
    • N/A
Re: First knife
« Reply #2 on: February 27, 2013, 10:31:17 pm »
Nice work Clint, I watched madcrow make a sheath the other day, he put a vegggie-tan welt between the layers of rawhide to protect the stitching
Matt
Logged
Matt Bradley

Glade Valley, NC

Offline seabass

  • Member
  • Posts: 2,267
Re: First knife
« Reply #3 on: February 27, 2013, 11:06:10 pm »
Clint,you sew a piece of thicker leather between your stitching on your sheath.it is called a wealt.it keeps your blade from touching the stitching.hope this helps brother.i have some thick leather if you need some.
Logged
Middletown,Ohio

Offline Gsulfridge

  • Member
  • Posts: 1,573
Re: First knife
« Reply #4 on: February 27, 2013, 11:16:40 pm »
Oh my! I like that a lot.
Nice work outlaw!!
Logged
Greg Sulfridge, Lafollette, TN

Offline Ifrit617

  • Member
  • Posts: 1,596
Re: First knife
« Reply #5 on: February 27, 2013, 11:36:21 pm »
Man Clint that's a beauty. I would be proud to carry a knife like that and im sure your boss will be. As others have said, a welt keeps the blade from cutting the stitching. When I sew up my sheaths, I typically glue in the welt first with contact cement , then punch through all three layers at once. This just keeps the sheath a little neater in my opinion..

Jon
Logged

Offline Hunts with stone

  • Member
  • Posts: 285
Re: First knife
« Reply #6 on: February 28, 2013, 12:12:51 am »
Nice work Clint. With that thin stock you can make some sweet fillet knifes too.
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: First knife
« Reply #7 on: February 28, 2013, 07:08:39 am »
Nice work,way better than my first. Love the handle. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: First knife
« Reply #8 on: February 28, 2013, 10:17:53 am »
Thanks guys, and thanks for the info on the sheath.  I never really thought about it until I started putting one together.   
Logged
I started out with nothin' and I still got most of it left

Offline cracker

  • Member
  • Posts: 3,123
Re: First knife
« Reply #9 on: February 28, 2013, 10:19:29 am »
looks pretty good to me. I'd tote it. Ron
Logged
If we can't help each other what is the point of being here?

Offline ErictheViking

  • Member
  • Posts: 1,504
Re: First knife
« Reply #10 on: February 28, 2013, 12:37:46 pm »
great job whether first or not.
Logged
"He that but looketh on a plate of ham and eggs to lust after it hath already committed breakfast with it in his heart"  C.S. Lewis

Offline jonathan creason

  • Member
  • Posts: 1,122
Re: First knife
« Reply #11 on: February 28, 2013, 04:33:51 pm »
Nice work, Clint!  Be careful grinding aluminum, you could mess around and make thermite.
Logged
Cleveland, NC

"The only thing cooler than bands that gets lots of chicks are bands that scare chicks." - Beavis

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: First knife
« Reply #12 on: February 28, 2013, 04:34:44 pm »
Very nice Clintster! With your attention to detail and monstrous patience level I believe you could do just about anything you want to do.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline _Jon_

  • Member
  • Posts: 889
Re: First knife
« Reply #13 on: February 28, 2013, 05:56:49 pm »
Nice job on that one.  Looks great.  Like others have said, use a welt, then super glue it is what I do.  Goes quicker.  I also after the super glue dries, I use a sander to sand the edges of the sheath to smooth it out.  I then use Eco-Flo from Tandy to finish the leather. 

Strange, I log on after I finish making a sheath.   :)
Logged
Member of "Twin Oaks Bow Hunters,"  Chapmansboro, Tennessee

Offline Stoker

  • Member
  • Posts: 1,729
Re: First knife
« Reply #14 on: February 28, 2013, 07:06:46 pm »
Nice knife. Like the handle and the blade she'll serve you well.
Thanks leroy
Logged
Bacon is food DUCT tape - Cipriano
Pages: [1] 2
« previous next »