Author Topic: Backing or no backing..?  (Read 2998 times)

0 Members and 2 Guests are viewing this topic.

Offline bow101

  • Member
  • Posts: 2,235
Backing or no backing..?
« on: November 04, 2012, 07:11:10 pm »
I need to pull a little more weight on a board bow, "red oak"
Problem is can't get any strips of Boo/Yew or Hickory in my neck of the woods.
I'm on a Poor man's Budget Big Time... :( although I can wait a while...
Silk, denim or any other material will not increase the weight.

Ya ok why not just glue on another strip of oak.!!!!
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline bubby

  • Member
  • Posts: 11,054
Re: Backing or no backing..?
« Reply #1 on: November 04, 2012, 07:25:47 pm »
what are the dimensions of the bow and what draw # are you trying to get, Bub
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bow101

  • Member
  • Posts: 2,235
Re: Backing or no backing..?
« Reply #2 on: November 04, 2012, 07:37:20 pm »
It's 60" NTN , I'm hoping to get around 40#........ritenow it's pulling about 30# at 25 inches. the bow liimbs are on the slender side less that 1 3/8 ..
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline bubby

  • Member
  • Posts: 11,054
Re: Backing or no backing..?
« Reply #3 on: November 04, 2012, 11:32:27 pm »
bendy handle or stiff, if stiff how long fade to fade
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bow101

  • Member
  • Posts: 2,235
Re: Backing or no backing..?
« Reply #4 on: November 04, 2012, 11:44:02 pm »
Stiff, no sure i think about 24 inches
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: Backing or no backing..?
« Reply #5 on: November 04, 2012, 11:50:15 pm »
Not sure how red oak takes heat, but. Heat treat check tiller. Then flip tips. That may get you some LB's
Clatskanie, Oregon

Offline bow101

  • Member
  • Posts: 2,235
Re: Backing or no backing..?
« Reply #6 on: November 05, 2012, 12:00:05 am »
Exactly how do you Heat treat again....? ???
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline Adam

  • Member
  • Posts: 913
Re: Backing or no backing..?
« Reply #7 on: November 05, 2012, 12:01:57 am »

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: Backing or no backing..?
« Reply #8 on: November 05, 2012, 12:10:49 am »
Pike 2 1/4" off each tip and it'll add a good ten pounds and since you have a short draw it should still be safe. Wait for some one with more experienced to agree with this first since I am still a beginner.

Offline bubby

  • Member
  • Posts: 11,054
Re: Backing or no backing..?
« Reply #9 on: November 05, 2012, 01:29:28 am »
you have a 60" bow with a 24" stiff area, that gives you 36" of working limb, that aint enough, almost half of the bow dont do anything, the handle area is way to big
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bow101

  • Member
  • Posts: 2,235
Re: Backing or no backing..?
« Reply #10 on: November 05, 2012, 03:30:16 pm »
Thanks bubby, I'll have to remedy the issue.

"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline autologus

  • Member
  • Posts: 1,092
Re: Backing or no backing..?
« Reply #11 on: November 05, 2012, 03:35:52 pm »
Is it 24" fade to fade across the handle or is it 24" fade to tip so that each limb is 24" long?  24" for a stiff center is awful long.

Grady
Proud Hillbilly from Arkansas.

Offline bubby

  • Member
  • Posts: 11,054
Re: Backing or no backing..?
« Reply #12 on: November 05, 2012, 04:49:46 pm »
on my stiff handles i use a 4" grip and anywhere from a 1 1/2" fade to 2 1/2", at the most that's 9", Bub
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bow101

  • Member
  • Posts: 2,235
Re: Backing or no backing..?
« Reply #13 on: November 05, 2012, 06:16:08 pm »
my mistake its about 16 inches
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline bubby

  • Member
  • Posts: 11,054
Re: Backing or no backing..?
« Reply #14 on: November 05, 2012, 06:28:18 pm »
that's still  pushing it, standard rule of thumb is double your draw length plus 10%, but hell might as well go for it, if ya got the oak at HD or lowes the probbally have some hard maple that would make a better backer than red oak, but if thats all you can get use it, let us know what happens.
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹