« previous next »
Pages: [1]

Author Topic: Zebrawood as bellywood?  (Read 3068 times)

0 Members and 1 Guest are viewing this topic.

Offline Easternarcher

  • Member
  • Posts: 622
Zebrawood as bellywood?
« on: October 11, 2012, 06:43:19 pm »
I have one board that is perfectly quarter sawn Zebrawood....
I was going to use it as riser material for my boo backed bows, but after looking at that near perfect straight grain, I wonder if it will stand up to compression???
Has anyone tried it?
Logged

Offline chamookman

  • Member
  • Posts: 3,026
Re: Zebrawood as bellywood?
« Reply #1 on: October 11, 2012, 07:20:51 pm »
Any attemp at what You're asking about that I have seen, ended up either chryslling terribly or dying a violent death during tillering. Bob
Logged
"May the Gods give Us the strength to draw the string to the cheek, the arrow to the barb and loose the flying shaft, so long as life may last." Saxon Pope - 1923.

Offline paulsemp

  • Member
  • Posts: 1,918
Re: Zebrawood as bellywood?
« Reply #2 on: October 11, 2012, 07:47:49 pm »
Did it once and will never do it again, for the cost of the wood and lack of performance. Shot maybe 100 arrows before it blew in my face.
Logged

Offline Easternarcher

  • Member
  • Posts: 622
Re: Zebrawood as bellywood?
« Reply #3 on: October 11, 2012, 08:41:14 pm »
Not exactly glowing reviews for this wood then.... :o
Riser wood it shall be then!
thanks
Logged

Offline tattoo dave

  • Member
  • Posts: 1,545
  • Rockford, MI
Re: Zebrawood as bellywood?
« Reply #4 on: October 11, 2012, 09:39:52 pm »
That's a bummer. I was pondering the idea of trying a bow out of it myself. The only reason I haven't is they probably wouldn't approve the personal loan I'd have to take out to buy some. ;)

Tattoo Dave
Logged
Rockford, MI

Offline Easternarcher

  • Member
  • Posts: 622
Re: Zebrawood as bellywood?
« Reply #5 on: October 11, 2012, 10:07:56 pm »
These bows that blew up?????were they self bows or backed laminates...
Is the wood brittle or something???
Logged

Offline warpath

  • Member
  • Posts: 365
Re: Zebrawood as bellywood?
« Reply #6 on: October 11, 2012, 10:55:24 pm »
If you want it just for looks, you can cut it really thin. About 1/16" - 1/32" will be fine. Any thicker and it will chrysal and/or explode!! :(  I've done this many times cutting it to a veneer and laminating it on the belly with no problems. It won't up the draw weight, (maybe a 1/2lb at the most,) but it will make the belly look nice. I've also done this with birdseye zebrawood!!!

  G
Logged

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Re: Zebrawood as bellywood?
« Reply #7 on: October 12, 2012, 02:57:06 am »
footed arrows?
Logged

mikekeswick

  • Guest
Re: Zebrawood as bellywood?
« Reply #8 on: October 12, 2012, 03:47:51 am »
Soft, low density and useless in compression. It's quite cheap here. I only use it for cores where it performs really quite well and can look GREAT between dark woods. Useless for footed arrows.
Logged

Offline Easternarcher

  • Member
  • Posts: 622
Re: Zebrawood as bellywood?
« Reply #9 on: October 12, 2012, 08:24:05 am »
Quote from: mikekeswick on October 12, 2012, 03:47:51 am
Soft, low density and useless in compression. It's quite cheap here. I only use it for cores where it performs really quite well and can look GREAT between dark woods. Useless for footed arrows.

I haven't worked it yet, but low density? maybe I confuse density with actual weight....it is quite heavy..
I could do cores, but I think I'll keep most of it for risers.
Thanks folks.
Logged
Pages: [1]
« previous next »