« previous next »
Pages: [1]

Author Topic: Ash...backing strip or bellywood?  (Read 2794 times)

0 Members and 1 Guest are viewing this topic.

Offline Easternarcher

  • Member
  • Posts: 622
Ash...backing strip or bellywood?
« on: October 04, 2012, 12:37:45 pm »
I have the best ash board I have ever had right now. :)
I was going to rip it into backing strips(they would be all quarter sawn or ring-biased) but then I got to wondering...seems I read here somewhere that ash would do better as bellywood than backing???I'm talking about backing Osage, yew or maybe applewood and maple and likely a little HHB thrown in....R/D or HH style longbow.

So where should this stuff go? as back or use it as bellywood and back with something else?
« Last Edit: October 04, 2012, 01:27:54 pm by Easternarcher »
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Ash...backing strip or bellywood?
« Reply #1 on: October 04, 2012, 01:33:31 pm »
Ash is stronger in tension than compression. That should answer your question.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Matt S.

  • Member
  • Posts: 380
Re: Ash...backing strip or bellywood?
« Reply #2 on: October 04, 2012, 01:51:33 pm »
Quote from: PEARL DRUMS on October 04, 2012, 01:33:31 pm
Ash is stronger in tension than compression. That should answer your question.

I concur. My friend made an ash pyramid bow and it took a bit more set than you would expect from its density, suggesting it is stronger in tension.

All of the other woods you've listed would probably over power an Ash belly.

I'd definitely rip it into backing strips.
Logged

Offline Easternarcher

  • Member
  • Posts: 622
Re: Ash...backing strip or bellywood?
« Reply #3 on: October 04, 2012, 02:11:47 pm »
Yup, that's what I thought too but I thought I'd better check just in case.
I know someone said it made good belly wood? ::) but my initial purpose  can now proceed.
Logged

Offline sleek

  • Member
  • Posts: 6,764
Re: Ash...backing strip or bellywood?
« Reply #4 on: October 04, 2012, 03:24:26 pm »
Why not make a bow of the board? Ash makes a wonderful bow. If you want, trap the back a touch to add more compression and less set. Ash is a pleasure to work....
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Easternarcher

  • Member
  • Posts: 622
Re: Ash...backing strip or bellywood?
« Reply #5 on: October 04, 2012, 03:29:07 pm »
Sleek, I think it will have more value to me anyways as backing strips when I build my laminated bows using the other woods I mentioned....but does not mean that I may save a piece to use as a bow too. ;)
Logged

Offline druid

  • Member
  • Posts: 475
Re: Ash...backing strip or bellywood?
« Reply #6 on: October 04, 2012, 04:06:05 pm »
Depends of combination. With bl it should be belly wood. I other combinations back wood. At least ash like mine.
Logged

Offline Easternarcher

  • Member
  • Posts: 622
Re: Ash...backing strip or bellywood?
« Reply #7 on: October 04, 2012, 04:17:37 pm »
Druid, this is all White Ash. Absolutely clean and straight! :)
Logged
Pages: [1]
« previous next »