« previous next »
Pages: [1] 2

Author Topic: Robinia  (Read 5296 times)

0 Members and 1 Guest are viewing this topic.

Offline LJB

  • Member
  • Posts: 37
Robinia
« on: June 24, 2012, 12:27:37 pm »
Hi there!

So I have been reading and learning a lot here at PA. First off all, thanks guys, for posting your bow's, your techniques and experiences. This board is a great help for beginning (and experienced, witch i am not) bowyers.

Here are some pics of the first piece of wood that survived my attempts to make a bow out of it (I broke 2 pieces of Elderberry before...).
It is Black Locust, messures 68" nock to nock:



@ brace hight:



It pulls 55# @ 28":



Some character, lil snaky:



String position:



Some leather for nice gripp:



the Sappwood was left at the nocks, i like the different colors also some Austriche sinew with hidegleu to protect this crack:



And i also made some arrows for this bow:



It was polished with a glass bottle then finished with boiled linnseedoil.
I had some great online help from the german board FC. Thanks guys ;)

Best regards,

Leo
Logged

Offline Matt A

  • Member
  • Posts: 123
Re: Robinia
« Reply #1 on: June 24, 2012, 01:30:15 pm »
beauty
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Robinia
« Reply #2 on: June 24, 2012, 01:48:16 pm »
Congratulations on your first successful bow and for doing so well with locust(a wood I have problems with  ;D ). It is obvious that you took your time and the results show.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bcbull

  • Member
  • Posts: 541
Re: Robinia
« Reply #3 on: June 24, 2012, 02:29:06 pm »
looks good however u best get the super glue out i see a good ol crack right there at the tip in ur pic with the sap wood n noks  brock
Logged

Offline LJB

  • Member
  • Posts: 37
Re: Robinia
« Reply #4 on: June 24, 2012, 02:51:03 pm »
Thanks guys!

Dont you think the sinew wraps keeping the crack in place? I don really worry about the crack anymore, it stays right where it is since i started working on this Stave. The bow threw several 100 arrows by now. It hast little less than 1" of sett, almost no Stringfollow and no crysals (yet ;) ).

See you, Leo
Logged

Offline ErictheViking

  • Member
  • Posts: 1,504
Re: Robinia
« Reply #5 on: June 24, 2012, 03:25:03 pm »
Very cool bow. the sapwood nocks are nice.
Logged
"He that but looketh on a plate of ham and eggs to lust after it hath already committed breakfast with it in his heart"  C.S. Lewis

Offline lesken2011

  • Member
  • Posts: 2,063
  • Kenny
Re: Robinia
« Reply #6 on: June 24, 2012, 04:32:52 pm »
Nice job. LJB. Well done for an early bow, for sure!
Logged
For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.

Ephesians 2:8-9

Kenny from Mississippi, USA

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Robinia
« Reply #7 on: June 24, 2012, 04:40:05 pm »
If properly applied that sinew will lock down those cracks nice and tight!  A little superglue would just be added insurance, easy enough to do and not very expensive. 

I am really loving the sapwood nocks.  I almost called them "overlays", but that would not be correct since they are not added to the bow, but simply left in place.  I have a chunk of mulberry with sapwood still in place, I will remember your nocks when I build that bow!!!

There is wonderful character in those limbs.  Not an easy tillering job, but you have done a wonderful job, LJB.  You have a bow you can be proud of!
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline RyanY

  • Member
  • Posts: 1,999
Re: Robinia
« Reply #8 on: June 24, 2012, 05:35:29 pm »
Awesome. I love how well balanced the limbs look at full draw even though the tip has a little reflex on the lower limb. Those tips are sweet with the sapwood left there. Can't wait to see more bows from you. Keep it up!
Logged

Offline LJB

  • Member
  • Posts: 37
Re: Robinia
« Reply #9 on: June 24, 2012, 06:08:14 pm »
Thanks a lot for all that positive feedback guys!

Ok, I will spent some super glue on the crack, just to be sure. Ötzi probably would use it as well if he got it ;)

Tillering it was not easy, the string was not centered when i first braced it, the handle was twisting in my hand when i pulled it  :o
But he, with some patience, lots of thinking and a change of mind it turned out realy good  ;D
I am so happy with this bow, it is a nice shooter as well.

Thanks again!

 
Logged

Offline okie64

  • Member
  • Posts: 1,134
Re: Robinia
« Reply #10 on: June 24, 2012, 06:26:56 pm »
Very nice bow. Nice character and beautiful tiller.
Logged

Offline Buckeye Guy

  • Member
  • Posts: 3,033
Re: Robinia
« Reply #11 on: June 24, 2012, 06:36:59 pm »
That sir is a fine job on a not so easy stick !!
Cool tips too !!
Have fun!
 Guy
Logged
Guy Dasher
The Marshall Primitive Archery Rendezvous
Primitive Archery Society
Having  fun
To God be the glory !

Offline hammertime

  • Member
  • Posts: 763
  • no shoes no shirt, no problems
Re: Robinia
« Reply #12 on: June 24, 2012, 06:54:46 pm »
Nice work and awesome looking bow you got there!I like those tips and character!Hammertime
Logged

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: Robinia
« Reply #13 on: June 24, 2012, 11:27:46 pm »
Looks real nice, all around good job you did there. Black locust is sometimes difficult to tiller properly but you did a fine job on that one. You'll be shooting that for a long time LJB, enjoy it and congrats.
  Greg
Logged
I ain't broke but I'm badly bent.

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: Robinia
« Reply #14 on: June 24, 2012, 11:56:17 pm »
Very nice!!
Logged
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.
Pages: [1] 2
« previous next »