« previous next »
Pages: [1]

Author Topic: Sealing wood  (Read 6722 times)

0 Members and 1 Guest are viewing this topic.

Offline bluegill

  • Member
  • Posts: 21
Sealing wood
« on: September 04, 2007, 01:08:05 am »
I have my eye on a nice osage tree which I plan on cutting this week. What is the best way to seal both ends after cutting it? Will candle wax work?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Sealing wood
« Reply #1 on: September 04, 2007, 01:11:11 am »
Wax will work fine but can be a pain to use. Carpenters glue is easy to use and works well. Split the log at least in half then seal the ends and an inch down from each end.   Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bluegill

  • Member
  • Posts: 21
Re: Sealing wood
« Reply #2 on: September 04, 2007, 01:13:32 am »
By carpenters glue do you mean wood glue?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Sealing wood
« Reply #3 on: September 04, 2007, 01:23:14 am »
Yes. Elmer's, TB, TBII, TBIII. Anything that will prevent the ends from drying. You want the moisture to come out the split sides and not the ends or back.    Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Sealing wood
« Reply #4 on: September 04, 2007, 10:12:56 am »
Elmers has worked fine for me, also Shellac (thanks Pat :). Just be sure if you use wood glue you store your staves out of the rain ;D.

Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Sealing wood
« Reply #5 on: September 04, 2007, 10:37:17 am »
All of the above. paint, polyacrylic, polyurethane, etc. Whatever you have on hand. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Sealing wood
« Reply #6 on: September 04, 2007, 11:29:57 am »
Same here. Cheap elmer's glue or Bullseye spray shellac.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline DanaM

  • Member
  • Posts: 9,211
Re: Sealing wood
« Reply #7 on: September 04, 2007, 11:35:20 am »
I like the shellac but I buy a quart can for about the price of one spray or 2 spray cans. And is even cheaper by the gallon.
Logged
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Sealing wood
« Reply #8 on: September 04, 2007, 12:27:47 pm »
Cheap Elmer's glue.  $7/gallon   It dries fast, but if it gets on your truck when you load the logs it comes off.  I have paint and urethane stains in the back of my truck from loading the logs while it was still wet.  :-X Justin
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline bluegill

  • Member
  • Posts: 21
Re: Sealing wood
« Reply #9 on: September 04, 2007, 02:10:10 pm »
Thanks for all the info. The osage I plan on cutting is about 3" in diameter. Am I correct in saying that the bark should be removed immediately after cutting?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Sealing wood
« Reply #10 on: September 04, 2007, 02:17:01 pm »
I would leave the bark on, split it in half and seal the ends.  If the bark slips off you should immediately seal the sapwood, well!    Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Auggie

  • Member
  • Posts: 652
  • redneck engineer
Re: Sealing wood
« Reply #11 on: September 05, 2007, 01:48:55 am »
Boo-hoo justin, after all ,it is just a dodge.
Logged
laugh. its good for ya
Pages: [1]
« previous next »