Author Topic: My first successful osage bow  (Read 4900 times)

0 Members and 1 Guest are viewing this topic.

Offline snag

  • Member
  • Posts: 419
My first successful osage bow
« on: May 22, 2012, 12:30:13 pm »
Not able to find osage here in Oregon I bought one of Gary Davis' staves. So, it is not fully my work in that respect. I made this stave into a 64" ntn 52#@28". It has a positive tiller of 1/8" after shooting it several hundred times. It has about .5 string follow. At the fades it is 1.5" with .5" at the nocks. With the knots in this piece it was a challenge chasing a ring for this "newbie". But with all the info. on this site it made it much more achievable.  This is my first leather handle wrap....I need lots of work on this! haha I will take this one off and glue on an arrow rest then apply another wrap. But I was so eager to try a wrap and shoot it some more I just tried my hand it and have been shooting it off my hand. The right side is the upper limb.
Is. 49:2 ....He made me a polished arrow and concealed me in His quiver.

Offline snag

  • Member
  • Posts: 419
Re: My first successful osage bow
« Reply #1 on: May 22, 2012, 12:33:10 pm »
I will post a picture of me drawing the bow when I have time today.
Is. 49:2 ....He made me a polished arrow and concealed me in His quiver.

Offline Will H

  • Member
  • Posts: 2,120
Re: My first successful osage bow
« Reply #2 on: May 22, 2012, 12:37:48 pm »
You did good. Gary has some great bow wood, his bow blanks are second to none ;)
Proud Member of Twin Oaks Bowhunters
           Clarksville, Tennessee

   "Middle Tennessee is the place to be"

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: My first successful osage bow
« Reply #3 on: May 22, 2012, 01:25:01 pm »
That may be your first osage bow but it surely ain't your first bow! Very nice!!!
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline snag

  • Member
  • Posts: 419
Re: My first successful osage bow
« Reply #4 on: May 22, 2012, 01:30:13 pm »
You're right, it is my 3rd bow. I made a hazelnut bow that was successful but not the right poundage. A lot of learning went on during that bow. Then I attempted to make an osage bow with another stave. It was not the right design for that piece of wood and I just didn't like the results...too low in poundage also. So with this one I seemed to have put a lot of things I learned on this site to use and I am happy with the results.  I truly thank everyone who contributes to this site and shares what they know. It has made it possible for me to do this.
David
Is. 49:2 ....He made me a polished arrow and concealed me in His quiver.

Offline killir duck

  • Member
  • Posts: 747
  • i like elk
Re: My first successful osage bow
« Reply #5 on: May 22, 2012, 02:36:36 pm »
nice!!
PRIMITIVE ARCHERY what other way can you play with sticks and rocks all day and not look like a little kid

Every time i shoot at a bunny i recall the wise words of Elmer Fudd "I've got you now you waskally wabbit!"

Offline Fred Arnold

  • Member
  • Posts: 1,566
  • From up on Munson Creek
Re: My first successful osage bow
« Reply #6 on: May 22, 2012, 03:28:30 pm »
Snag, I like it!! Also like the design of the tips. Very clean looking.
I found many years ago that it is much easier and more rewarding working with those that don't know anything than those that know it all.

Offline dmc

  • Member
  • Posts: 136
Re: My first successful osage bow
« Reply #7 on: May 22, 2012, 03:35:46 pm »
I've never worked a stave before, but I can appreciate beauty. I love the look of Osage. Great job! I wish this stuff grew in Saskatchewan. I've only ever seen it first hand growing in Oklahoma.
Carpe Diem- Seize the Day!!

Offline snag

  • Member
  • Posts: 419
Re: My first successful osage bow
« Reply #8 on: May 22, 2012, 09:37:43 pm »
Here it is at full draw.....don't recognize the old guy with my bow though..... ???
Is. 49:2 ....He made me a polished arrow and concealed me in His quiver.

Offline SA

  • Member
  • Posts: 452
Re: My first successful osage bow
« Reply #9 on: May 22, 2012, 09:58:08 pm »
that looks good , nice job.
Shawn Acker

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: My first successful osage bow
« Reply #10 on: May 22, 2012, 09:59:05 pm »
Nice! Love the tiller. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline snag

  • Member
  • Posts: 419
Re: My first successful osage bow
« Reply #11 on: May 22, 2012, 10:07:42 pm »
That's music to my ears George! Thanks, David
Is. 49:2 ....He made me a polished arrow and concealed me in His quiver.

Offline tattoo dave

  • Member
  • Posts: 1,545
  • Rockford, MI
Re: My first successful osage bow
« Reply #12 on: May 22, 2012, 10:44:23 pm »
Another one of them yellow sticks! :) Turned out sweet Snag!! Nice work man.

Tattoo Dave
Rockford, MI

Offline snag

  • Member
  • Posts: 419
Re: My first successful osage bow
« Reply #13 on: May 23, 2012, 01:19:27 am »
I'm already thinking about the next one...
Is. 49:2 ....He made me a polished arrow and concealed me in His quiver.

Offline Judo Point

  • Member
  • Posts: 114
Re: My first successful osage bow
« Reply #14 on: May 23, 2012, 02:32:17 am »
Very nice job Snag! Nice tiller and over all beautiful bow! I agree with ya on this site definitely the best on the net! Congratulations on a purdy bow!