« previous next »
Pages: [1]

Author Topic: How to lay out the belly taper on a reflexed stave?  (Read 3488 times)

0 Members and 1 Guest are viewing this topic.

Offline Ifrit617

  • Member
  • Posts: 1,596
How to lay out the belly taper on a reflexed stave?
« on: May 03, 2012, 11:56:15 am »
Hey Everyone,

I think I posted this when the server was down and that is why it is no longer showing up.. So I'll post it again... I am wondering how to layout the belly taper on a reflexed stave.. I want to taper from 5/8" at the handle to 1/2" at the tips as a starting point... I ruined most of the bows I made last summer by rushing this step and which eventually led to compression failures.. Does anybody have any tips to laying out a smooth intial belly taper? How do you all do it? Tips or tricks would be great.. Thanks.

Jon
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: How to lay out the belly taper on a reflexed stave?
« Reply #1 on: May 03, 2012, 12:03:13 pm »
I replied and it was lost as well. I highly suggest a straight 5/8" taper. You will notice most well tillered bows have VERY little taper to them. 
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Ifrit617

  • Member
  • Posts: 1,596
Re: How to lay out the belly taper on a reflexed stave?
« Reply #2 on: May 03, 2012, 12:08:40 pm »
Ok PD, That might be what I'll do.. I like your compass trick, it seems to work out well..

Thanks.

Jon
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: How to lay out the belly taper on a reflexed stave?
« Reply #3 on: May 03, 2012, 12:45:58 pm »
If you start parallel its dang hard to create a hinge. I cant remember the last time I seen one on any of my bows.   
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Ifrit617

  • Member
  • Posts: 1,596
Re: How to lay out the belly taper on a reflexed stave?
« Reply #4 on: May 03, 2012, 01:31:08 pm »
I build bendy handle bows mostly and have had a couple bend to much in the handle... That is why I am nervous about making it straight.... Maybe I will leave the handle a full 3/4 inch thick and "fade" to 5/8"  then keep the belly straight from there... I assume this will help me avoid having to much bend at the handle early on and will allow me to get it bending evenly later on in the process...

Does this sound good?

Jon
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: How to lay out the belly taper on a reflexed stave?
« Reply #5 on: May 03, 2012, 01:46:31 pm »
When I build bendy bows I leave about 3/8" x 4" long center area with 1" fades that will be my handle section. I tiller the bow as normal and then tweek the handle thickness until it gives some at 24-25" of draw. The confusion comes in when we call parallel slat bows bendy bows. Bendy bows are only a pinch from being flat bows. Your basically rasping the handle down until it starts to move.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Ifrit617

  • Member
  • Posts: 1,596
Re: How to lay out the belly taper on a reflexed stave?
« Reply #6 on: May 03, 2012, 03:24:44 pm »
What do you mean by parallel slat bows? When I say bendy handle bows I personally mean a NA style bow that bends evenly its entire length.... Such as the bows half eye builds.. I still think I will do what I said in my above post then reduce that slightly thicker handle section once long string tillering is complete.. 

Anybody else have any input?

Jon
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: How to lay out the belly taper on a reflexed stave?
« Reply #7 on: May 03, 2012, 03:30:31 pm »
Slat bows are equal thickness bows that bend there entire length as you described. They require very little tillering.  A working handle bow is as I described above. Thats what I was explaining all along. We must have crossed wires. Sorry
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Ifrit617

  • Member
  • Posts: 1,596
Re: How to lay out the belly taper on a reflexed stave?
« Reply #8 on: May 03, 2012, 03:34:57 pm »
No problem... Do you think that a regular thickness would still work to start the tillering of a "slat" bow?

Thanks.

Jon
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: How to lay out the belly taper on a reflexed stave?
« Reply #9 on: May 03, 2012, 03:37:50 pm »
The Good Friday bow I just posted is a working handle bow. Rich's bows are slat bows. At least thats how I describe them due there uniform thickness. I wouldnt want a slat bow to be anything but parallel when I start. You will basically do nothing more than reduce weight and keep a circular tiller. The tiller should be close right off, maybe a touch stiff at the tips.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline JonW

  • Member
  • Posts: 1,906
Re: How to lay out the belly taper on a reflexed stave?
« Reply #10 on: May 03, 2012, 07:33:40 pm »
Jon,
   I think if you are making a bow with a narrowed handle go with your plan. If the bow is a full width do as PD says. That's how I do mine anyway. Hope that helps.

Jon W.
Logged

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: How to lay out the belly taper on a reflexed stave?
« Reply #11 on: May 04, 2012, 06:23:51 am »
  PEARL DRUMS right when you tiller your bow. The limb (side taper) takes care this I've tryed to taper limbs like this and you can but very little. I see no beifit in doing this.
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING
Pages: [1]
« previous next »