« previous next »
Pages: [1]

Author Topic: URAC 185 to glue Takedown Sleaves???  (Read 1761 times)

0 Members and 3 Guests are viewing this topic.

Offline mississippidave

  • Member
  • Posts: 49
URAC 185 to glue Takedown Sleaves???
« on: March 01, 2012, 01:52:12 pm »
Hey folks,  Just got my billets ready to glue up for the 2012Idaho bearhunt bow im building.  I don't have any smooth on but I do have some Urac, just wondering if ya'll think that would work OK...I'm not sure of it's gap filling properties....Thanks in advance, Dave
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: URAC 185 to glue Takedown Sleaves???
« Reply #1 on: March 01, 2012, 02:12:47 pm »
I would suggest a metal expoxy rather.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: URAC 185 to glue Takedown Sleaves???
« Reply #2 on: March 01, 2012, 02:22:17 pm »
Two ton epoxy in the doube syrenge should work fine for the sleaves.  I'm not sure how well Urac would adere t the brass sleeve.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline vinemaplebows

  • Member
  • Posts: 1,419
Re: URAC 185 to glue Takedown Sleaves???
« Reply #3 on: March 01, 2012, 03:46:58 pm »
2ton is great epoxy for wood to wood contact....worthless on metal. Pat, put it on a flat piece of steel it will chip off easily. I do like it for splices...Devcon 30 minute set, don't use the 5 minute too brittle.

Brian


Logged
Debating is an intellectual exchange of differing views...with no winners.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: URAC 185 to glue Takedown Sleaves???
« Reply #4 on: March 01, 2012, 03:56:35 pm »
Thanks Brian. I'll remember that when i get around to installing the take down sleeve I have.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline vinemaplebows

  • Member
  • Posts: 1,419
Re: URAC 185 to glue Takedown Sleaves???
« Reply #5 on: March 01, 2012, 04:00:14 pm »
Has anyone trie the pc-7 epoxy???
Logged
Debating is an intellectual exchange of differing views...with no winners.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,913
  • Eddie Parker
Re: URAC 185 to glue Takedown Sleaves???
« Reply #6 on: March 01, 2012, 07:56:13 pm »
I have, it holds up pretty good, so far.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline vinemaplebows

  • Member
  • Posts: 1,419
Re: URAC 185 to glue Takedown Sleaves???
« Reply #7 on: March 01, 2012, 08:20:58 pm »
Called the company on the pc-7 they said it should work well.....I personally have not used it.
Logged
Debating is an intellectual exchange of differing views...with no winners.

Offline Carson (CMB)

  • Member
  • Posts: 2,319
Re: URAC 185 to glue Takedown Sleaves???
« Reply #8 on: March 01, 2012, 08:43:55 pm »
Hi-jack...Pat, Dave what are your sleeves from?  I am getting ready to tackle a takedown and I am looking for sleeve options out there other than three-rivers products. 

As for the glue, I love urac, but have not done anything other than wood-to-wood with it.
Logged
"The bow is the old first lyre,
the mono chord, the initial rune of fine art
The humanities grew out from archery as a flower from a seed
No sooner did the soft, sweet note of the bow-string charm the ear of genius than music was born, and from music came poetry and painting and..." Maurice Thompso
Pages: [1]
« previous next »