« previous next »
Pages: [1] 2

Author Topic: Red B-50 string colour rubbing off problem  (Read 2564 times)

0 Members and 1 Guest are viewing this topic.

Offline Slackbunny

  • Member
  • Posts: 866
Red B-50 string colour rubbing off problem
« on: February 26, 2012, 05:00:34 pm »
So I bought a 1/4lb spool of red B-50 and when I made a string with it I noticed that the red colour would rub off onto the bow which looks like crap. Anyone know a fix for this problem?

I've tried rubbing it with paper towel to get all the excess colour off but it doesn't seem to help much. Should I soak it in water or boil it or something?
Logged

Offline Lee Slikkers

  • Member
  • Posts: 1,545
Re: Red B-50 string colour rubbing off problem
« Reply #1 on: February 26, 2012, 05:15:34 pm »
Yup, the Red SUCKS...save yourself some time and hassle, give it away to someone who doesn't mind.  I couldn't get mine to stop letting off no matter what...
Logged
~ Lee

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"The last word in ignorance is the man who says of an animal or plant: 'What good is it?"
— Aldo Leopold
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Offline Ifrit617

  • Member
  • Posts: 1,596
Re: Red B-50 string colour rubbing off problem
« Reply #2 on: February 26, 2012, 05:41:48 pm »
It happens and ya can't do much about it... personally I don't mind but some do...

Jon
Logged

Offline Slackbunny

  • Member
  • Posts: 866
Re: Red B-50 string colour rubbing off problem
« Reply #3 on: February 26, 2012, 05:48:52 pm »
Any other colour I should avoid?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Red B-50 string colour rubbing off problem
« Reply #4 on: February 26, 2012, 05:53:54 pm »
Red is the worst and the most obvious. I've never noticed it from any other colors but maybe they blended in better.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Dictionary

  • Member
  • Posts: 717
Re: Red B-50 string colour rubbing off problem
« Reply #5 on: February 26, 2012, 06:19:52 pm »
the blue lets off just a tad bit for me, but no big deal.
Logged
"I started developing an eye for those smooth curves as a young man.  Now that my hair is greying and my middle spreading I make bows instead."

-JW_Halverson

Offline straightarrow

  • Member
  • Posts: 501
  • "Success or failure, neither are final"
Re: Red B-50 string colour rubbing off problem
« Reply #6 on: February 26, 2012, 06:33:46 pm »
Had the same problem years ago... never came off on the bow though. I first seen the problem making a red and white string..... or should I say red and pink. I avoid using it with light colors. Never had problems with red fast flight.

Jon
Logged

Offline Baldmoose

  • Member
  • Posts: 97
Re: Red B-50 string colour rubbing off problem
« Reply #7 on: February 26, 2012, 06:40:31 pm »
Honestly.... i think it just adds character.... looks like some blood may have been smeared or something...   ive got it all over my hemp backed maple.   
Logged
Baldmoose
"The Pain is Worth The Glory"

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Red B-50 string colour rubbing off problem
« Reply #8 on: February 26, 2012, 06:42:34 pm »
Make a bunch of red tillering strings with it. 
Logged
I started out with nothin' and I still got most of it left

Offline Buckeye Guy

  • Member
  • Posts: 3,033
Re: Red B-50 string colour rubbing off problem
« Reply #9 on: February 26, 2012, 07:43:32 pm »
The red is the worst I think !
Clean your bow up and use Tru-oil to finish it its a hard enough finish that the red does not bleed into it!
Guy
Logged
Guy Dasher
The Marshall Primitive Archery Rendezvous
Primitive Archery Society
Having  fun
To God be the glory !

Offline sweeney3

  • Member
  • Posts: 277
Re: Red B-50 string colour rubbing off problem
« Reply #10 on: February 26, 2012, 08:12:32 pm »
I just got used to it.  ;)
Logged

Offline artcher1

  • Member
  • Posts: 1,114
Re: Red B-50 string colour rubbing off problem
« Reply #11 on: February 26, 2012, 08:28:21 pm »
Yep, red sucks!

But you can still use it. Seal the string groove/tip area using super glue (apply with Q-tip). Stain first if needed. Then just a cleaner like mineral spirits to remove the waxy red residue.
Logged

Offline kleinpm

  • Member
  • Posts: 218
Re: Red B-50 string colour rubbing off problem
« Reply #12 on: February 27, 2012, 11:01:04 am »
You could wrap your loops with serving. I just use monofilament flyfishing tippet. I have not had the red come off since, and my cheap mono serving hasn't given me an trouble in several years.

Patrick
Logged

Offline Slackbunny

  • Member
  • Posts: 866
Re: Red B-50 string colour rubbing off problem
« Reply #13 on: February 27, 2012, 11:31:42 am »
Quote from: kleinpm on February 27, 2012, 11:01:04 am
You could wrap your loops with serving. I just use monofilament flyfishing tippet. I have not had the red come off since, and my cheap mono serving hasn't given me an trouble in several years.

Patrick

Well that might be worth trying.
Logged

Offline Youngboyer2(billyf)

  • Member
  • Posts: 487
  • Live by the man-née and the sa-wa.
Re: Red B-50 string colour rubbing off problem
« Reply #14 on: February 27, 2012, 02:15:57 pm »
yellow works pretty good, never had bad problems with red, maybe keeping it well waxed will help keep a layer between the strring and the bow.
Logged
"You speak Treason!" "Fluently"-Robin of Locksley
When people ask "why didn't you do that the first time" you can be sure that they  have never made a bow before.
Pages: [1] 2
« previous next »