« previous next »
Pages: [1] 2 3

Author Topic: How did they cut horn and antler?  (Read 8279 times)

0 Members and 1 Guest are viewing this topic.

Offline WolfPupTee

  • Member
  • Posts: 167
  • You don't understand what I'm doing, but I do.
    • The Artis Den
How did they cut horn and antler?
« on: January 25, 2012, 03:55:21 pm »
How did primitive peoples cut antler and horn for a horn bow or a billet? What did they use?
Logged
Plays With Bow and Arrow

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: How did they cut horn and antler?
« Reply #1 on: January 25, 2012, 05:32:34 pm »
Stone blades.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline doggonemess

  • Member
  • Posts: 123
    • That's My Web Guy
Re: How did they cut horn and antler?
« Reply #2 on: January 25, 2012, 06:05:26 pm »
Flint and obsidian are incredibly sharp when shaped into a wedge. I've heard that they can rival scalpels. Shaped into a triangle, I imagine you could make a pretty decent drill-point to hollow out anything as well.
Logged
"We've all heard that a million monkeys banging on a million typewriters will eventually reproduce the entire works of Shakespeare. Now, thanks to the Internet, we know this is not true." - Robert Wilensky

Great minds discuss ideas, average minds discuss events, small minds discuss people.

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: How did they cut horn and antler?
« Reply #3 on: January 25, 2012, 06:18:42 pm »
Quote from: doggonemess on January 25, 2012, 06:05:26 pm
I've heard that they can rival scalpels.
The reason obsidian is so sharp is because it breaks on the molecular level. Tiny flakes have been used in eye surgery because even the best scalpel cannot be sharpened that fine. They are very delicate. Obsidian made into arrowheads or knifes cannot have that delicate of edge.
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: How did they cut horn and antler?
« Reply #4 on: January 25, 2012, 06:54:22 pm »
I have read that an obsidian flake is the sharpest known object in the world.
Logged
I started out with nothin' and I still got most of it left

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: How did they cut horn and antler?
« Reply #5 on: January 25, 2012, 07:09:05 pm »
It is that 'molecular level' thing. flakes can feather out to a molecular edge. I have seen comparisons of a surgical scalpel edge to an obsidian flake. Under a powerfull microscope, it is like compairing a lawn mower blade to a razor blade.
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline WolfPupTee

  • Member
  • Posts: 167
  • You don't understand what I'm doing, but I do.
    • The Artis Den
Re: How did they cut horn and antler?
« Reply #6 on: January 25, 2012, 07:12:30 pm »
Wow I knew it was sharp. And antler is only dead bone after all.
Logged
Plays With Bow and Arrow

Offline kiwijim

  • Member
  • Posts: 111
Re: How did they cut horn and antler?
« Reply #7 on: January 25, 2012, 07:31:26 pm »
Laubin suggests that horn bows in North America were relatively recent; 16th C. This would mean that bowyers may have had access to steel for cutting and shaping horn. I would be interesting to hear Dr Grayson's opinion on this.

The technique I use for tackling ram horn is probably very ancient and could be replicated with a stone age bow-drill.
Logged

Offline Lee Slikkers

  • Member
  • Posts: 1,545
Re: How did they cut horn and antler?
« Reply #8 on: January 25, 2012, 09:42:51 pm »
Excellent method for cutting that ram horn (wish I had seen this or thought about it when I was trying to cut one up a bit ago)  Out of curiosity what species ram is that horn?
Logged
~ Lee

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"The last word in ignorance is the man who says of an animal or plant: 'What good is it?"
— Aldo Leopold
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Offline WolfPupTee

  • Member
  • Posts: 167
  • You don't understand what I'm doing, but I do.
    • The Artis Den
Re: How did they cut horn and antler?
« Reply #9 on: January 25, 2012, 09:46:43 pm »
You drilled holes down the length of it and then tapped a wedge into the holes to split it is what you are saying?
Logged
Plays With Bow and Arrow

Offline kiwijim

  • Member
  • Posts: 111
Re: How did they cut horn and antler?
« Reply #10 on: January 26, 2012, 12:33:43 am »
Yep, I split the horn along the holes with a chisel. The horn is from a Wiltshire Ram.
Logged

Offline WolfPupTee

  • Member
  • Posts: 167
  • You don't understand what I'm doing, but I do.
    • The Artis Den
Re: How did they cut horn and antler?
« Reply #11 on: January 26, 2012, 01:35:15 am »
Makes sense!
Logged
Plays With Bow and Arrow

mikekeswick

  • Guest
Re: How did they cut horn and antler?
« Reply #12 on: January 26, 2012, 04:47:21 am »
Anybody who has made hornbows will realise that stone tools just aren't upto the job. Steel knifes would have been used. Remember why they started using hornbows - primarily to use on horseback. The pesky whiteman was already well 'settled' and trading for knives would have happened.
Logged

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: How did they cut horn and antler?
« Reply #13 on: January 26, 2012, 09:10:16 am »
Quote from: WolfPupTee on January 25, 2012, 07:12:30 pm
And antler is only dead bone after all.
Hmmm I don't think so....but I'm not sure.
Anyone like to opine on this? Obviously Horn isn't bone but is Antler????
I'm confused.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: How did they cut horn and antler?
« Reply #14 on: January 26, 2012, 09:23:52 am »
  CUT AND SAND AND DRILLED HOLES with what ever stone they had.
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING
Pages: [1] 2 3
« previous next »