« previous next »
Pages: 1 [2]

Author Topic: draw knife?  (Read 6535 times)

0 Members and 1 Guest are viewing this topic.

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: draw knife?
« Reply #15 on: January 17, 2012, 09:00:41 pm »
Here are my two drawknives.

My Dad gave me the one on top.  I'm not sure where he got it.  It is the older of the two I think.  The handles have a dished out area where your thumbs sit.  If only it could talk.  I hope to wear the thumb grooves out a little more over the years.  I have used it to peal the bark and sapwood off of all those osage staves this fall.  It is very sharp still.  I cut my finger on the blade a couple of months ago.  I can't tell what brand it is.  I can see a few letters stamped into it, but can't make out what they say.  I can see a seam on the blade where it looks like it was made from two different kinds of metal.  I picked up the one on bottom from a local antique store for $20.  It is a pine knot.  I use it for chasing rings.  It isn't as sharp as the other one.



In this picture, you can see the seam in the bottom blade.

Logged
I started out with nothin' and I still got most of it left

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: draw knife?
« Reply #16 on: January 17, 2012, 10:22:52 pm »
The top pic are may current three
8" curved
6" straight
4" straight

The bottom pic is one I just got today. off the auction site.
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline mighty joe

  • Member
  • Posts: 23
Re: draw knife?
« Reply #17 on: January 18, 2012, 01:37:34 am »
wow, thanks for the leads guys. and those are some good looking tools too.
Logged
the only easy day was yesterday and that's how i like it.

Offline YosemiteBen

  • Member
  • Posts: 1,952
Re: draw knife?
« Reply #18 on: January 18, 2012, 05:07:48 pm »
woodcraft.com made by Pfeil
Logged

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: draw knife?
« Reply #19 on: January 18, 2012, 08:57:15 pm »
Mine is a cheap tool shop draw knife I bought at a home improvement store called Menards.

Logged
(:::.) The ABO path is a new frontier to the past!

Offline mighty joe

  • Member
  • Posts: 23
Re: draw knife?
« Reply #20 on: January 31, 2012, 01:39:52 am »
got my new draw knife today in the mail. got in ebay, thanks for that tip. it said antique but it looks like it's in really good shape.

The James Swan Co. USA

 is printed in the metal on the left end. anybody know anything about these, like when and where they where made. i got some wood that's been sitting for about three months so i'm gonna pic me out a piece tomorrow and see how it works. i'll try to get some pictures of the knife up by tomorrow evening.
Logged
the only easy day was yesterday and that's how i like it.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: draw knife?
« Reply #21 on: January 31, 2012, 02:05:53 am »
Joe, Google that name and see what comes up.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Re: draw knife?
« Reply #22 on: January 31, 2012, 01:37:42 pm »
Sounds like you got a Nice Blade Joe!

"The Swan company, along with the Stanley Rule & Level Co., are considered to be the last manufacturers of fine edge tools working at the end of the classic period of American toolmaking."

Just the Bottom Line of a shallow search... :)

-gus
Logged
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX
Pages: 1 [2]
« previous next »