« previous next »
Pages: [1]

Author Topic: A few ongoing projects...  (Read 1395 times)

0 Members and 2 Guests are viewing this topic.

Offline jermcramp1

  • Member
  • Posts: 147
A few ongoing projects...
« on: January 13, 2012, 12:09:22 pm »


Ash cut last year, GUS is helping me out on this one.(thanks BUDDY!) I started chasing a ring before I knew I didnt need to. o well I need the practice. bow #4





First knife I made, not finished yet...




1st trade point, skillsaw blade single bevel







Bows #5+......... :D


String silencers to be...


Thanks for lookin! :)
Logged
Even the dogs get the crumbs...

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: A few ongoing projects...
« Reply #1 on: January 13, 2012, 12:27:59 pm »
I can see you are using circular sawblades for some of the knife blades. do you also use that for the broadheads? if so, what are your broadhead measurements? Have you weighed a finished one yet?
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: A few ongoing projects...
« Reply #2 on: January 13, 2012, 12:58:02 pm »
Cool projects,you got about as many things going as I do. :) :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline jermcramp1

  • Member
  • Posts: 147
Re: A few ongoing projects...
« Reply #3 on: January 13, 2012, 01:02:29 pm »
Yes for the broadhead as well, I got tons of old ones lying around... I think its 3" long, 2" blade, 1" tang, and about an inch wide? I dont have a scale so i was just winging it...figured if it was dropping the tip too much I could drill some lightening holes in it but it flew straight...
Logged
Even the dogs get the crumbs...

Offline jermcramp1

  • Member
  • Posts: 147
Re: A few ongoing projects...
« Reply #4 on: January 13, 2012, 01:03:45 pm »
We are only limited by our imaginations! Seems like the list keeps getting longer and longer!
Logged
Even the dogs get the crumbs...
Pages: [1]
« previous next »