« previous next »
Pages: [1]

Author Topic: Hawk and 2 blades  (Read 1528 times)

0 Members and 1 Guest are viewing this topic.

Offline bushman

  • Member
  • Posts: 282
Hawk and 2 blades
« on: December 22, 2011, 01:00:26 am »
Here are a few pictures. First is a ground slate hawk (it was already in that shape, I just squared up the back end and ground the blade but I got fix the bevel on the right bottom corner). Next is a small blade. Last is a bigger blade and the deer leg bone handle I’m going to scrimshaw that deer and elk into it, then hafted the blade. Thanks for looking.
Bushman












Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Hawk and 2 blades
« Reply #1 on: December 22, 2011, 08:31:02 am »
 All Very nice,I really like the hawk. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Hawk and 2 blades
« Reply #2 on: December 22, 2011, 09:09:13 am »
Those look good.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline StevenT

  • Member
  • Posts: 612
Re: Hawk and 2 blades
« Reply #3 on: December 22, 2011, 12:09:16 pm »
That is one bad looking pig sticker! The bone handle looks like ivory. Awsome!
Logged

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Hawk and 2 blades
« Reply #4 on: December 22, 2011, 01:58:17 pm »
That is some cool stuff! I like the way you've got that leg bone shaped up..
Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline Will H

  • Member
  • Posts: 2,120
Re: Hawk and 2 blades
« Reply #5 on: December 22, 2011, 10:01:02 pm »
Sweet! 8) 8) 8)
Logged
Proud Member of Twin Oaks Bowhunters
           Clarksville, Tennessee

   "Middle Tennessee is the place to be"

Offline bushman

  • Member
  • Posts: 282
Re: Hawk and 2 blades
« Reply #6 on: December 25, 2011, 12:53:53 am »
Thanks for all the replies, means a lot coming from you guys.
StevenT, ya it does look like ivory.
All I did to prep it was cut off the ends when it was fresh, push out the marrow, put it in warm water and let is soak for a few days, then change the water and repeat a few times, then I let it age for a year. Cut it to length, shaped it with a rasp and sandpaper. Then just used smoother and smoother sandpaper to polish it, last was 2000 grit emery paper and I used it wet under a slow trickle of warm water.
Merry Christmas and a Happy New Year everyone.
Bushman
Logged
Pages: [1]
« previous next »