« previous next »
Pages: [1] 2

Author Topic: Beltsander for bow making......  (Read 7128 times)

0 Members and 1 Guest are viewing this topic.

TurtleCreek

  • Guest
Beltsander for bow making......
« on: December 14, 2011, 03:03:24 pm »
  Anybody have any advice or tips that I should be aware of when looking to buy one of these for the shop?
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Beltsander for bow making......
« Reply #1 on: December 14, 2011, 03:24:56 pm »
Get a 6 x 48 and turn it on its side so you can use the whole length for limb edges and such. Thats my two cents anywho.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Buckeye Guy

  • Member
  • Posts: 3,033
Re: Beltsander for bow making......
« Reply #2 on: December 14, 2011, 04:12:56 pm »
Pearl has the right idea , if you can afford it !
Work your way down from there if you can't.
Guy
Logged
Guy Dasher
The Marshall Primitive Archery Rendezvous
Primitive Archery Society
Having  fun
To God be the glory !

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Beltsander for bow making......
« Reply #3 on: December 14, 2011, 04:56:34 pm »
Menards has 6" x 48" for around $180.00. They are a sub-brand, but I have zero issues with the same brand planer.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

TurtleCreek

  • Guest
Re: Beltsander for bow making......
« Reply #4 on: December 14, 2011, 05:39:47 pm »
  Thanks guys....  i only plan on using it for rough work, so I don't think I need to spend a whole lot of money on it
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Beltsander for bow making......
« Reply #5 on: December 14, 2011, 05:50:45 pm »
$125 is about the cheapest Ryan.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline adb

  • Member
  • Posts: 5,339
Re: Beltsander for bow making......
« Reply #6 on: December 14, 2011, 09:45:47 pm »
I have a Delta 6X48. Worth every penny. I ddn't use a belt sander much at first either, but it gets plenty of work these days.
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Beltsander for bow making......
« Reply #7 on: December 14, 2011, 09:56:24 pm »
It can do tips, handles, edges, tapers and everything in between. Great tool to have around for sure, especially if you build many board bows.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Beltsander for bow making......
« Reply #8 on: December 14, 2011, 11:13:01 pm »
I have 2 of the smaller belt sanders, 4x32" I think.  Bought one new and the other off Craigslist.  I keep a course belt on one and a fine belt on the other.  They do come in handy. 
Logged
I started out with nothin' and I still got most of it left

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Beltsander for bow making......
« Reply #9 on: December 14, 2011, 11:47:31 pm »
I do most of my rough in tillering with one. I also have a wood hog 12" circular table sander that will eat some wood real quick with 40 grit.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline MWirwicki

  • Member
  • Posts: 2,234
  • The wood speaks to you; Listen with your eyes. GSD
Re: Beltsander for bow making......
« Reply #10 on: December 15, 2011, 12:08:32 am »
Yes, if you can get the 6 x 48.  I also have an off brand horizontal.  It gets plenty of use and has held up well.  Also, invest in a belt dresser.  Its like a big eraser that extends the life of your belt by cleaning some of the embedded wood fibers out of it. 
Logged
Matt Wirwicki
Owosso, MI

TurtleCreek

  • Guest
Re: Beltsander for bow making......
« Reply #11 on: December 15, 2011, 06:13:01 am »
  I will be checking them out later today.....
Logged

Offline Badger

  • Member
  • Posts: 8,124
Re: Beltsander for bow making......
« Reply #12 on: December 15, 2011, 09:15:17 am »
  I like the 6x48. I use to buy the little 4x36 deltas but I went through at least 1 or 2 a year. If you are not making a lot of bows the smaller one will do ok.
Logged

Grunt

  • Guest
Re: Beltsander for bow making......
« Reply #13 on: December 15, 2011, 10:54:40 am »
I've had a 6x48 Grizzly for the past twenty five years or so. I use it all the time for edges, tips,etc. Cool tool.
Logged

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Beltsander for bow making......
« Reply #14 on: December 15, 2011, 01:03:03 pm »
Mine is a 6 x 48 with a belt driven motor which I inherited from Dad. I use it for rough tillering, handle shaping, nock shaping and lots of other things including point tapering. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!
Pages: [1] 2
« previous next »