Author Topic: hickory/sinew horsebow finaly version  (Read 10303 times)

0 Members and 1 Guest are viewing this topic.

Offline bubby

  • Member
  • Posts: 11,054
Re: hickory/sinew horsebow finaly version
« Reply #15 on: November 09, 2011, 06:05:58 pm »
great bow Lukasz, what were the dimensions of the wood prior to steaming, lenght width, thickness, amazing bends, Bub
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline JBL

  • Member
  • Posts: 108
Re: hickory/sinew horsebow finaly version
« Reply #16 on: November 11, 2011, 12:22:40 am »
BRAVO!!!  Very nice.  The finish is awesome.

Offline Lukasz Nawalny

  • Member
  • Posts: 233
  • Lukasz Nawalny
    • Camelot bows
Re: hickory/sinew horsebow finaly version
« Reply #17 on: November 11, 2011, 07:16:25 am »
wood humidity before steaming was high , I dont know exactly but that was stripwood directle from big trunk. in time of rehydration i had big problems with twisted limbs , I have to corret this many times with heat gun . 118 CM long ,limbs  3,5 cm X 1 cm ,in handle and on recurve about 2 cm

Offline bubby

  • Member
  • Posts: 11,054
Re: hickory/sinew horsebow finaly version
« Reply #18 on: November 11, 2011, 07:37:37 am »
thank's Lukasz, Bub
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Scowler

  • Member
  • Posts: 611
Re: hickory/sinew horsebow finaly version
« Reply #19 on: November 11, 2011, 10:24:19 am »
So many curves for a selfbow...Quite a beautiful bow.

Offline Lukasz Nawalny

  • Member
  • Posts: 233
  • Lukasz Nawalny
    • Camelot bows
Re: hickory/sinew horsebow finaly version
« Reply #20 on: March 03, 2012, 02:00:44 pm »
hi.Im still working on scythian style bows and this is my last version. Only 99 cm long , 50 lb at 26". Shots well with light arrows , with 18 - 20 gram arrows and 26 inch cross over 200 fps. It is not flight bow but not bad. Im still try to make this bows better , maybe I will make few modifications in future

Offline RyanY

  • Member
  • Posts: 1,999
Re: hickory/sinew horsebow finaly version
« Reply #21 on: March 03, 2012, 02:44:37 pm »
That's awesome! Is this one also hickory and sinew?

Offline Lukasz Nawalny

  • Member
  • Posts: 233
  • Lukasz Nawalny
    • Camelot bows
Re: hickory/sinew horsebow finaly version
« Reply #22 on: March 03, 2012, 07:21:32 pm »
yes wood/sinew

Offline Sparrow

  • Member
  • Posts: 1,985
  • Who shot cock robin ? I said the sparrow.
    • Dream Fish Charters
Re: hickory/sinew horsebow finaly version
« Reply #23 on: March 03, 2012, 07:43:16 pm »
That is simply incredible ! Beautiful too ! !  '  Frank
Frank (The Sparrow) Pataha, Washington

Offline Ifrit617

  • Member
  • Posts: 1,596
Re: hickory/sinew horsebow finaly version
« Reply #24 on: March 03, 2012, 07:45:29 pm »
How is it possible that the Hickory does not get compression fractures??? Awesome bow

Jon

Offline Gordon

  • Member
  • Posts: 3,299
Re: hickory/sinew horsebow finaly version
« Reply #25 on: March 03, 2012, 09:47:38 pm »
Quote
How is it possible that the Hickory does not get compression fractures???

I have the same question. How is this possible especially given that hickory is not remarkable in compression? I am amazed.
Gordon

Offline PatM

  • Member
  • Posts: 6,737
Re: hickory/sinew horsebow finaly version
« Reply #26 on: March 03, 2012, 11:53:44 pm »
Well we don't know for sure if it actually has chrysals or not......
 One possible answer is that the steaming process allows cells to become very plastic and compact uniformly. Look at the inside curve of a sharply curved steamed recurve and check for obvious chrysals there.
 If the inner limb is given a new "starting position" before being asked to compress even further the already uniformly compressed cells can likely take it.
 From that point on a fair bit of the draw length comes from the outer limb straightening out rather than bending.
 Having said all that, chrysals don't actually stop a bow from shooting.

Offline Gordon

  • Member
  • Posts: 3,299
Re: hickory/sinew horsebow finaly version
« Reply #27 on: March 04, 2012, 02:13:58 am »
Even so, that is an astonishing feat for a stiff-handled bow that is less than 40" in length. Everything I thought I knew about making wooden bows has gone completely out the window with this bow. I'm in awe...
Gordon

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Re: hickory/sinew horsebow finaly version
« Reply #28 on: March 04, 2012, 03:54:23 am »
Is this a horn belly?

the tips are spliced in or bent?

Offline Lukasz Nawalny

  • Member
  • Posts: 233
  • Lukasz Nawalny
    • Camelot bows
Re: hickory/sinew horsebow finaly version
« Reply #29 on: March 04, 2012, 03:58:29 am »
no horn and no chrysals ;) After steaming I make shape and deflexive sections, wood is not in big compresion , also belly tepred ofcourse, sinew make great work on this bow