Author Topic: Yew stave for snake skins  (Read 5088 times)

0 Members and 1 Guest are viewing this topic.

Offline ravenbeak

  • Member
  • Posts: 333
  • Pacific Yew Wood
    • Ravenbeak Natureworks
Yew stave for snake skins
« on: October 05, 2011, 12:01:12 am »
Hey all,

I have a couple nice yew staves sitting in the pile,  mostly green wood,  sealed.  I was gonna buy the skins online but if someones got some to offer and would a go at some yew hit me up.

will post pics,

cheers,
Jamie
Custom Yew Bows,  and bow making workshops
www.ravenbeak.com

Offline Kpete

  • Member
  • Posts: 238
Re: Yew stave for snake skins
« Reply #1 on: October 05, 2011, 02:39:37 pm »
What kind of snake skins do you want, and how long do you need.  I may have a couple prairie rattler skins for you.

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: Yew stave for snake skins
« Reply #2 on: October 06, 2011, 12:43:00 am »
if only i had some snakes...... wait there is a few pet stores near my house >:D
noel
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline ravenbeak

  • Member
  • Posts: 333
  • Pacific Yew Wood
    • Ravenbeak Natureworks
Re: Yew stave for snake skins
« Reply #3 on: October 06, 2011, 04:04:26 am »
I could be into prarie rattlers,  as long as they matched and were enough for a bow,    if I were to order,  I would probably end up with a matched set of diamondbacks,   but I am also interested in some of the less commercial snake skins out there.   hit me up with what you have access to!
Custom Yew Bows,  and bow making workshops
www.ravenbeak.com

Offline adb

  • Member
  • Posts: 5,339
Re: Yew stave for snake skins
« Reply #4 on: October 06, 2011, 12:12:29 pm »
PM sent.

Offline ravenbeak

  • Member
  • Posts: 333
  • Pacific Yew Wood
    • Ravenbeak Natureworks
Re: Yew stave for snake skins
« Reply #5 on: October 07, 2011, 01:03:36 am »
Here are the three staves I pulled out of the pile.   all green wood,  down a couple weeks.  all 70 ish inches long.  from small diameter trees.
Custom Yew Bows,  and bow making workshops
www.ravenbeak.com

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Re: Yew stave for snake skins
« Reply #6 on: October 08, 2011, 02:52:17 am »
how are you getting such a clean straight cut on those small diameter staves?

what is the weight of a green stave and where are you?  How are they sealed?

Offline ravenbeak

  • Member
  • Posts: 333
  • Pacific Yew Wood
    • Ravenbeak Natureworks
Re: Yew stave for snake skins
« Reply #7 on: October 08, 2011, 02:43:20 pm »
I have been cutting the smaller stuff on my table saw freehand,  no fence.  If a bit bigger,  I rip it first with the skihl saw and then to the table saw.

not sure of the weight,  depends on the size,  I could weigh them if you're really interested.  I seal them by making a very clean smooth cut and then two coats of TB3 on each end

I am located in powell river,  b.c canada,
« Last Edit: October 08, 2011, 04:22:01 pm by ravenbeak »
Custom Yew Bows,  and bow making workshops
www.ravenbeak.com

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Re: Yew stave for snake skins
« Reply #8 on: October 10, 2011, 01:52:29 am »
Oh shucks I can imagine waht they will cost to ship to me down here in Iowa.  But i'm curious for dimensions on some.

 I've got 6 bows coming through the pipes.  I'd need to swap for skins then swap for bows.  . . . this is why they invented money and money derivatives as early as some of the first comunities.  Even the North American Indians had wampum. . . though the least convienent source of currency ever concieved was wives.  Wonder if they all had to supply their own Advil, and stress medicines?

have you seen some of the faux skins?  I haven't seen them close but they look nice in photo and add backing strength.  I'm coming round to the idea.  I'd love to get my hand on some python or boa.  Preferably Fla invasives. 

Offline ravenbeak

  • Member
  • Posts: 333
  • Pacific Yew Wood
    • Ravenbeak Natureworks
Re: Yew stave for snake skins
« Reply #9 on: October 10, 2011, 02:16:32 pm »
I have found that I can usually send to anywhere in north america but around or under 35 dollars
Custom Yew Bows,  and bow making workshops
www.ravenbeak.com

Offline Keenan

  • Member
  • Posts: 4,824
Re: Yew stave for snake skins
« Reply #10 on: October 10, 2011, 02:45:29 pm »
 Thats a good price on shipping and some fine looking yew. ;)

Offline MWirwicki

  • Member
  • Posts: 2,234
  • The wood speaks to you; Listen with your eyes. GSD
Re: Yew stave for snake skins
« Reply #11 on: October 12, 2011, 11:51:08 am »
Are you still looking for some skins?  I have matched set of prairies, maybe a few others. 
Matt Wirwicki
Owosso, MI

Offline Mechslasher

  • Member
  • Posts: 1,046
Re: Yew stave for snake skins
« Reply #12 on: October 13, 2011, 04:41:50 pm »
i have a couple canebreak rattlesnake skins if interested.  shoot me a pm.
"A liberal is someone who feels a great debt to his fellow man, which debt he proposes to pay off with your money." 

G. Gordon Liddy

Offline ravenbeak

  • Member
  • Posts: 333
  • Pacific Yew Wood
    • Ravenbeak Natureworks
Re: Yew stave for snake skins
« Reply #13 on: October 19, 2011, 02:02:58 am »
Just wanted to add,   

that if anyone is looking to get ahold of some yew...  send me a p.m.   I have more wood to trade off.  staves and boards.

cheers,
jamie
Custom Yew Bows,  and bow making workshops
www.ravenbeak.com

Offline MWirwicki

  • Member
  • Posts: 2,234
  • The wood speaks to you; Listen with your eyes. GSD
Re: Yew stave for snake skins
« Reply #14 on: October 19, 2011, 10:31:20 pm »
Do you have yew boards?
Matt Wirwicki
Owosso, MI