« previous next »
Pages: [1]

Author Topic: vintage draw knife find  (Read 12934 times)

0 Members and 1 Guest are viewing this topic.

TurtleCreek

  • Guest
vintage draw knife find
« on: June 25, 2011, 03:06:55 am »
  I picked up two draw knives at an antique store in the Wisconsin Dells area and was wondering if any of you out there might know any kind of history on what I found.  The blades are 9 and 10 inches, both are slightly curved.  The first one is marked"Simmons Keen Kutter" and the second is marked "Reliance".  The finish on the steel of the keen is nice and smooth, while the steel on the reliance has the texture similar to that of a cast iron skillet.  Both are in excellent shape.  I just thought I would see if anybody knew anything about them. 
Logged

Offline dwardo

  • Member
  • Posts: 1,456
Re: vintage draw knife find
« Reply #1 on: June 25, 2011, 09:58:23 am »
The darker looking steel one is probably a good quality high carbon tool steel. My pride and joy is around the 100 years old mark and still peeling wood almost daily. Smaller curved blade seems to give me a whole load more control.
here is my baby.

Logged

Offline sadiejane

  • Member
  • Posts: 1,030
Re: vintage draw knife find
« Reply #2 on: June 25, 2011, 12:25:50 pm »
morning! have one of the reliances. its short, about 8 inches, and curved nicely. tho i have numerous others, this is the one i like the most. like that its narrower, gives me more control. and the curve lets me take wood off right where i want to. the keen kutter is a nice draw knife also. have had a few but traded em. nothing like good old american steel. no matter how much you pay, no one makes em that good anymore. nice finds!
Logged
wild women don't get the blues

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: vintage draw knife find
« Reply #3 on: June 25, 2011, 01:00:45 pm »
Most of the old drawknives you find are made with better steel than what most of us can afford today. I prefer the older ones the best. As long as the edge is not pitted they make great bow building tools and even with pitted edge they are good for removing bark and sapwood.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: vintage draw knife find
« Reply #4 on: June 25, 2011, 03:37:21 pm »
Here's the deal, Turtle.  I'll send you the postage, you send'em to me and I'll do some extensive research into their history.  I'll even put a good sharp edge on 'em for you.

Mind you, it might take me a few years to finish the research, but rest assured it will be thorough.   >:D

I had to go up on the hill and root around the brush to find the cheap piece of chinese crap I threw up there earlier this spring so that I could chase a growthring on my trade bow.  I'm getting ready to throw it even further up into the brush where it belongs, this kinda crap shouldn't even be recycled for fear of the bad ju-ju it will pass along!

Congrats on your excellent find.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: vintage draw knife find
« Reply #5 on: June 25, 2011, 04:27:55 pm »
Yeah, you can't beat those old tools, I got one of E-bay, has a little nick dead centre on the blade, but I figure a few years of use and I'll have sharpened it out.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline HoBow

  • Member
  • Posts: 1,439
  • The choices we make dictate the lives we lead.
Re: vintage draw knife find
« Reply #6 on: June 25, 2011, 09:27:33 pm »
I have an expensive one and an old antique and I rarely use the new one...
Logged
Jeff Utley- Atlanta GA

Offline Dane

  • Member
  • Posts: 1,870
Re: vintage draw knife find
« Reply #7 on: June 25, 2011, 09:50:22 pm »
Mine was made in MA in the late 1800s, came with a cool old wooden sheath, and cost me about 50 bucks in a local antique store. I'd never give up that knife, and as with all old tools, it has a soul, and a history, and was made by craftsmen who cared about their products in the old day.

Dane
Logged
Greenfield, Western Massachusetts

Offline johnston

  • Member
  • Posts: 976
Re: vintage draw knife find
« Reply #8 on: June 25, 2011, 10:12:17 pm »
Cool thread, made me go look at my knife a little closer. Wood working fellow  gave it to me after he saw my home made version. It belonged to his grand dad and had hung in their shop for decades. It is a 10" straight edge Arpenter. Doesn't tell me much but I will not part with it, fine old tool.

Lane
Logged

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Re: vintage draw knife find
« Reply #9 on: June 25, 2011, 11:48:40 pm »
I have a   PS&W CO PECK STOW & WILCOX # 1 FX
The Interweb says P.S&W Co were out of Southington CT from 1870-1950.
8" cutting edge with a slight curve.
Picked it up at a garage sale for $5. Tried to give the nice Lady a $20 but she wouldn't have it.
The blade is in prime condition with a newly mirror polished back.

-Gus
Logged
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX

Offline Young Bowyer

  • Member
  • Posts: 133
  • What is this?
Re: vintage draw knife find
« Reply #10 on: June 26, 2011, 12:41:55 am »
 My drawknife I got from a guy at a yard sale for 15 bucks or so. Didn't come with a sheath but ive been so busy
Logged
"A man can be destroyed, but not defeated."
The old man from Ernest Hemingway's The Old Man And The Sea

Offline randman

  • Member
  • Posts: 647
Re: vintage draw knife find
« Reply #11 on: June 26, 2011, 04:52:34 am »
I have an old Reliance #5 hand plane made in 1887 (or there abouts). Stanley bought the company shortly after and came out with their own #5 iron plane which used the same adjustment mechanism and looked very similar. Long story short - If you have a drawknife marked Reliance, its probably over 130 years old. It probably has the cast iron looking side (low carbon softer steel) one one side and a thin strip of high carbon steel
laminated along the cutting edge side (similar to today's Japanese cutting tools). That's so you don't have to sharpen a thick wedge of super hard steel, all the hard stuff is on the very thin edge and the rest of the supporting wedge is softer (not to mention the high carbon steel was much more expensive than the low carbon steel). A lot of the plane blades and cutting tools of the 18th and 19th century were like that but now only the Japanese cutting tools are.
Logged
Beauty is in the eye of the beer holder.

Offline wildman

  • Member
  • Posts: 863
Re: vintage draw knife find
« Reply #12 on: June 26, 2011, 12:34:47 pm »
Very cool thread. I have an antique "mall" not far from where I live. The KeenKutter axes fetch a premium price, the nice thing is you can pickup drawknives for around $20 and all look very old. I get one or two a year from there.Where are the brand marks as I have never noticed one on any I have looked at?
Logged
" Society your crazy greed , hope your not lonely without me"

-Eddie Vedder-

Offline Young Bowyer

  • Member
  • Posts: 133
  • What is this?
Re: vintage draw knife find
« Reply #13 on: June 26, 2011, 05:15:20 pm »
wildman, my drawknife is a Canadian Champion drawknife, got it from a sale in town for a good price, red wooden handles and takes a razor edge.
Logged
"A man can be destroyed, but not defeated."
The old man from Ernest Hemingway's The Old Man And The Sea

TurtleCreek

  • Guest
Re: vintage draw knife find
« Reply #14 on: June 28, 2011, 03:46:38 am »
Wildman,  the markings on the two I picked up can be seen on the top of the blade near the back edge in the middle
Logged
Pages: [1]
« previous next »