« previous next »
Pages: [1]

Author Topic: Would a 2 pound brass hammer work for spalling?  (Read 2074 times)

0 Members and 1 Guest are viewing this topic.

Offline Ncsnipe

  • Member
  • Posts: 178
Would a 2 pound brass hammer work for spalling?
« on: April 14, 2011, 03:56:22 pm »
Just wondering if brass is soft enough to use for spalling as I can get one for half the price of copper?
Logged

Offline piper

  • Member
  • Posts: 344
Re: Would a 2 pound brass hammer work for spalling?
« Reply #1 on: April 14, 2011, 04:13:26 pm »
I have one an it works for me......Curt
Logged
It's hard to ride two horses when you only have one ass

                     Western North Carolina

Offline leapingbare

  • Member
  • Posts: 2,028
    • http://www.flintknappers.com/jessewright/
Re: Would a 2 pound brass hammer work for spalling?
« Reply #2 on: April 14, 2011, 05:13:38 pm »
It will work but i would get atleast a 3 pounder
Logged
Mililani Hawaii

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Would a 2 pound brass hammer work for spalling?
« Reply #3 on: April 14, 2011, 07:12:53 pm »
I use a 3# er also.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Would a 2 pound brass hammer work for spalling?
« Reply #4 on: April 14, 2011, 07:43:49 pm »
I've used a heavy chunk of brass, and it works, but not as well as copper. It's really hard to beat a big diabase hammerstone for spalling IMO.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline Bill Skinner

  • Member
  • Posts: 384
Re: Would a 2 pound brass hammer work for spalling?
« Reply #5 on: April 14, 2011, 09:13:17 pm »
For spalling, I personally prefer a huge moose antler about 12 to 18 inches long.  Bill
Logged

Offline Timo

  • Member
  • Posts: 2,026
Re: Would a 2 pound brass hammer work for spalling?
« Reply #6 on: April 14, 2011, 11:56:28 pm »
I took a 6lb splitting maul,cut off the wedge, and took it to cherry red in a forge, let it cool in a bucket of lime, welded on a short 4" pipe handle. No temper left and it, works well for field spalling.
Logged
Pages: [1]
« previous next »