« previous next »
Pages: 1 [2]

Author Topic: Tiller question  (Read 3584 times)

0 Members and 1 Guest are viewing this topic.

Offline Caius

  • Member
  • Posts: 47
Re: Tiller question
« Reply #15 on: March 31, 2011, 02:14:57 pm »
Awesome help guys, I got one side a little thick at midlimb that I just noticed, so Im going to thin that down a bit and then exercise and leave it strung for a bit.  I did check and the string is still running straight across the center line.

Thanks so much for the help guys!
Logged
"Wyrd bið ful aræd"
Edmonton, AB

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Tiller question
« Reply #16 on: March 31, 2011, 03:54:06 pm »
If the twist is natural I leave it alone. If I caused it by uneven wood removal then I fix it. It will always twist towards the weak side. Remove wood from the other side. Regarding when to string it with the short string, I usually long string tiller out to 10 inches of string movement...not tip movement. I check weight and look at the tiller. When the weight is equal to or slightly greater than target weight at 10 inches I string  it up. There are buildalongs on my site. Jawge
http://georgeandjoni.home.comcast.net/~georgeandjoni/
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline Kent D.

  • Member
  • Posts: 331
Re: Tiller question
« Reply #17 on: March 31, 2011, 04:12:39 pm »
As mentioned, the truth will be told on a short string.  Just take your time and work your way down. 
Logged
Pages: 1 [2]
« previous next »