« previous next »
Pages: [1]

Author Topic: Fletching Glue with shellac  (Read 3572 times)

0 Members and 1 Guest are viewing this topic.

Offline Bevan R.

  • Member
  • Posts: 1,691
Fletching Glue with shellac
« on: February 11, 2011, 01:31:30 am »
What do you guys that shellac your shafts use for fletching glue?
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline Matt S.

  • Member
  • Posts: 380
Re: Fletching Glue with shellac
« Reply #1 on: February 11, 2011, 10:33:19 am »
I may be a bit of an oddball, but I use Titebond III for just about everything, fletching, nock reinforcement thread wrap, handle risers, tip overlays. TBIII works well for fletching but it does take at least 30 minutes to dry. I know a lot of people use Duco, super glue, or fletching tape.
Logged

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: Fletching Glue with shellac
« Reply #2 on: February 11, 2011, 10:41:00 am »
Never thought of using TBIII. Do you 'rough up' the shellac where you are gluing?
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline Matt S.

  • Member
  • Posts: 380
Re: Fletching Glue with shellac
« Reply #3 on: February 11, 2011, 10:53:07 am »
Quote from: Bevan R. on February 11, 2011, 10:41:00 am
Never thought of using TBIII. Do you 'rough up' the shellac where you are gluing?

Nope. I just shellac the shaft, wait for it to dry (at least an hour), then glue on the fletchings either using the simple jig I made or by hand wrapping.
Logged

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: Fletching Glue with shellac
« Reply #4 on: February 11, 2011, 11:36:26 am »
Hide glue or fish glue.  I don't use a fletching jig, so I put on my fletchings by hand and wrap with sinew.

I've used the gel-type super glue on modern arrows and I really like it.  I haven't used TB for fletching.
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Fletching Glue with shellac
« Reply #5 on: February 11, 2011, 11:42:16 am »
One nice thing about shellac is almost anything will stick to it and it will stick to just about anything.  ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: Fletching Glue with shellac
« Reply #6 on: February 11, 2011, 01:33:00 pm »
That is so much cooler that the stuff I am currently using. Have an issue with duco grabbing and holding. going to try the TBIII on the next batch.
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline thomas h

  • Member
  • Posts: 394
Re: Fletching Glue with shellac
« Reply #7 on: February 13, 2011, 10:21:55 pm »
i have good  luck with fletch-tite--platinum also fletch-tape will stick to almost anything.
Logged

Offline aznboi3644

  • Member
  • Posts: 802
Re: Fletching Glue with shellac
« Reply #8 on: February 14, 2011, 03:21:35 am »
i'll use a urethane glue for  fletching that I think needs gluing.
Logged
Pages: [1]
« previous next »