Ohma, the bow is 72 in tip to tip the amo is 68 inches. the handle area is 2 inches tapering to the tip at 5/8 inches. the wood is white laminated oak 3 layers of .090 . the handle is osage, with dyed hard rock maple laminated to the bow.The osage pc is 14inches tapered as the fade out.The finish is minwax sanding sealer with t-5 plastic coat lacquer.The bow is tilled 28 inches@40 lbs. There were 3 parallels used in the laminations are the white oak.One could use a tapered laminate on the top of riser fadeout, but I chose to use a parallel.090. Hope this answers your question.I demonstrate the build up on the u-tube. Thanks Denny
