« previous next »
Pages: [1] 2

Author Topic: Bowyers Bench/Shaving Horse  (Read 40242 times)

0 Members and 1 Guest are viewing this topic.

Offline CherokeeKC

  • Member
  • Posts: 574
  • PM108323
Bowyers Bench/Shaving Horse
« on: January 07, 2011, 02:25:51 pm »
Figured I could maybe give back a little to the people here on PA with these plans.

A couple things you can adjust for a personal fit:
1)  The legs.  Find a bench or chair that is a good height for you and make the bench that height.
2)  The vertical platform support.  Once the seat is made, legs attached, and platform cut out, sit on the bench at experiment with different platform angles/heights to find what is most comfortable for you.
3)  The foot plate.  Since the arm is offset to the left side of the bench, the footplate needs to extend to the right side more so that both feet can reach it comfortably.  The drawing is wrong in that the foot plate width dimensions need to be wider to accommodate this change.

One thing I would change if I were to make another shaving horse is to have two arms, one on each side of the bench.  So instead of cutting the slot in the platform and the seat for the movement of the arm, I would just attach one on each side of the bench.  This would also give equal tension when pressing down with your feet and max holding power.  The only disadvantage would be that you have to insert the piece of wood your working on from the front/top.

I just use a wooden dowel for the arm pivot.  This can be removed when needing to change the height of the arm to accept bigger logs.

PM me with any questions.















Logged
Aim Small...Hit Small

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Bowyers Bench/Shaving Horse
« Reply #1 on: January 07, 2011, 02:38:25 pm »
Nice bowyers bench, Cherokee.  I centered the knucklehead so I could work from either side.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Bowyers Bench/Shaving Horse
« Reply #2 on: January 07, 2011, 10:37:16 pm »
These benches are a joy to work with, really makes for handy adjustments to the stave while you are working.  Saves a lot of that time spent clampi9ng and unclamping from a table top.   I'd really like one that breaks down for easy transport to rondezvous and trade shows.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline nugget

  • Member
  • Posts: 1,995
  • I see, I hunt, I shoot, I eat
Re: Bowyers Bench/Shaving Horse
« Reply #3 on: January 07, 2011, 11:23:18 pm »
I have made a couple different designs. I like a vise in an open area so I can work all the way around.
Logged
Life is not a journey to the grave with the intentions of arriving safely in a pretty and well preserved body. But rather to slide in sideways, thoroughly used up, totally worn out and loudly proclaiming....WOW WHAT A RIDE!!

Offline LEGIONNAIRE

  • Member
  • Posts: 632
Re: Bowyers Bench/Shaving Horse
« Reply #4 on: January 08, 2011, 04:52:44 am »
nice.. thanks!
Logged
CESAR

LEGIONNAIRE ARCHERY

Offline PeteC

  • Member
  • Posts: 2,014
Re: Bowyers Bench/Shaving Horse
« Reply #5 on: January 08, 2011, 10:32:38 am »
Now that is neat. You did a great job on both the horse and the plans. Well done!  God Bless
Logged
What you believe determines how you behave., Pete Clayton, Whitehouse ,Texas

Offline Postman

  • Member
  • Posts: 1,154
Re: Bowyers Bench/Shaving Horse
« Reply #6 on: January 08, 2011, 10:42:47 am »
Quote from: Pat B on January 07, 2011, 02:38:25 pm
Nice bowyers bench, Cherokee.  I centered the knucklehead so I could work from either side.

Pat, How do you get enough leverage sitting right in the middle?   ;)


great bench Cherokee!
Logged
"Leave the gun....Take the cannoli"

John Poster -  Western VA

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Bowyers Bench/Shaving Horse
« Reply #7 on: January 08, 2011, 05:48:18 pm »
Postman, when you're working with a knucklehead like mine it is easy!  ;D
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Murphy95

  • Member
  • Posts: 6
Re: Bowyers Bench/Shaving Horse
« Reply #8 on: December 28, 2012, 10:16:33 am »
What kind of wood is it from?
Would spruce or pine be okay for building a shaving horse like this or would be not strong enough?

Greetings, Felix

PS: I´m new to this Forum an Bow building. I´m 17 years old, doing Archery for 3 years, and from Germany, so forgive me, if my English is not the best  ::)
Logged

Offline RBLusthaus

  • Member
  • Posts: 753
Re: Bowyers Bench/Shaving Horse
« Reply #9 on: December 28, 2012, 01:25:23 pm »
you might also consider putting a 1 inch or bigger dowel in the far end of the bench (proud of the surface) so you can push the far end of a stave against it thereby securing the stave side to side while hogging off sap wood, etc.   
Logged

Offline burn em up chuck

  • Member
  • Posts: 718
Re: Bowyers Bench/Shaving Horse
« Reply #10 on: January 10, 2013, 11:39:25 am »
thank you

                  chuck
Logged
Honored to say I'm a Member of the
         
                 Twin Oaks Bowhunters club

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: Bowyers Bench/Shaving Horse
« Reply #11 on: January 10, 2013, 02:57:23 pm »
Awesome thread!  Love the drawings!
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline richardzane

  • Member
  • Posts: 500
  • active Wyandot tribal member
    • richardzanesmith.wordpress.com
Re: Bowyers Bench/Shaving Horse
« Reply #12 on: January 13, 2013, 11:58:19 pm »
looks really nice! your an expert woodworker.
the only thing that worries me is the legs.. shaving horses get a lot of abuse and back and forth sway
and after awhile you might need to re-stabilize.
here's the most sturdy shaving horse i've seen..'course there are millions of variations out there. google shaving horse and WOW!

Logged
when i'm working on things my ancestors worked, singing the songs my ancestors sang, dancing the same dances, speaking the same language, only then  I feel connected to the land, THIS land, where my ancestors walked for thousands of years...

Offline randman

  • Member
  • Posts: 647
Re: Bowyers Bench/Shaving Horse
« Reply #13 on: March 03, 2013, 09:31:11 pm »
Nice little horse Cherokee. Looks like you're a pretty good Sketchup jockey as well.
Logged
Beauty is in the eye of the beer holder.

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: Bowyers Bench/Shaving Horse
« Reply #14 on: March 05, 2013, 01:38:22 pm »
Awesome!!
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr
Pages: [1] 2
« previous next »