« previous next »
Pages: [1] 2

Author Topic: a maple bow  (Read 7210 times)

0 Members and 1 Guest are viewing this topic.

Offline 15yearold.archer

  • Member
  • Posts: 73
a maple bow
« on: October 03, 2010, 03:28:43 pm »
hey guys heres a bow i made for my 13 year old brother its 50 pounds at 27 inches and is 63 inches long it has oak tip overlays and the arrow rest is built up leather widest point is 1 1/2 inches and tapers to 3/8s at the tips the close up on the handle is taken from the back of the bow the last 8 inches on each end are also slightly reflexed
enjoy

[attachment deleted by admin]
Logged

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: a maple bow
« Reply #1 on: October 03, 2010, 04:06:36 pm »
Nice tiller on that.
Bet your bro' is well pleased.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline half eye

  • Member
  • Posts: 3,300
Re: a maple bow
« Reply #2 on: October 03, 2010, 09:54:50 pm »
Looks like you are gettin a good handle on that tiller thing young man....it looks good
rich
Logged

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: a maple bow
« Reply #3 on: October 03, 2010, 10:57:41 pm »
Very nice.  You did a good job tillering that bow out.  Did you make it from the stave I gave you?
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: a maple bow
« Reply #4 on: October 03, 2010, 11:17:58 pm »
very nice bow you've come a long way fast !!! unusual to see a lefty shoot off the left side of a bow
Logged

Offline 15yearold.archer

  • Member
  • Posts: 73
Re: a maple bow
« Reply #5 on: October 03, 2010, 11:26:16 pm »
thanks guys and this is not the stave you gave me marc this is just a board but i was meaning to ask you, when i was tillering out the stave a spinter popped on the back about a foot from the tip its  pretty wide and about 3 inches long i  am not sure if its repairable though i want to give it a try cause i really liked this stave and i had put alot of time into it to get it the way i wanted, an ken thats just me pulling the bow im the lefty but i made the bow for the right :D
Logged

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: a maple bow
« Reply #6 on: October 03, 2010, 11:28:19 pm »
Ahhhh ! well its a dang good looking draw whoever it is !!
Logged

Offline NTD

  • Member
  • Posts: 1,771
Re: a maple bow
« Reply #7 on: October 03, 2010, 11:29:02 pm »
It really is incredible how quickly you grew in skill.  Beautiful job, tiller looks great!
Logged
Nate Danforth

Offline adb

  • Member
  • Posts: 5,339
Re: a maple bow
« Reply #8 on: October 04, 2010, 12:39:45 am »
Nice job... good tiller. Can your 13 yo brother really shoot 50#???
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: a maple bow
« Reply #9 on: October 04, 2010, 07:33:43 am »
Nice work,you done a fine job on that one. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Barrage

  • Member
  • Posts: 414
Re: a maple bow
« Reply #10 on: October 04, 2010, 01:15:47 pm »
Looks great.  Man, you got up to speed in a hurry.  Nice work and keep it up!  :) 8)
Logged
Travis

Offline Parnell

  • Member
  • Posts: 5,556
Re: a maple bow
« Reply #11 on: October 04, 2010, 02:36:37 pm »
Nice work, that tiller looks very good.  Hope you keep them rolling!
Logged
1’—>1’

Offline swamp yeti

  • Member
  • Posts: 640
Re: a maple bow
« Reply #12 on: October 04, 2010, 03:36:44 pm »
Good looking bow,nice work.
Logged

Offline Shooter

  • Member
  • Posts: 99
Re: a maple bow
« Reply #13 on: October 04, 2010, 05:21:37 pm »
Good job on that one
Logged

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: a maple bow
« Reply #14 on: October 04, 2010, 08:11:39 pm »
Wow! That is fantastic! Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!
Pages: [1] 2
« previous next »