« previous next »
Pages: [1] 2

Author Topic: juniper character bow- rawhide backed  (Read 6564 times)

0 Members and 2 Guests are viewing this topic.

Offline elk country rp

  • Member
  • Posts: 228
juniper character bow- rawhide backed
« on: September 10, 2010, 03:48:00 pm »
i started this a few days after having surgery in july. i was whacked out on painkillers at the time, which is probably why i thought it would work. it has 3 holes through it (2 on top limb, 1 on bottom) & a bunch of knots. i did all the shaping with a firemans knife & a rasp, with a little (ok, a LOT) of scraping with a knife-turned-scraper. feels like it pulls around 40#-45# @ 26", which is as far as i've pulled so far. i need to work the limbs more before it try for a full draw. it's 63" ntn, limbs are 2 1/4" at widest, tapering to 3/4" at tips (so far- i plan to reduce those), limbs are ~3/4" thick at fades, tapering to ~1/2" at tips (again- i'll be working on those). i can feel just a slight bend in the handle as i get it close to full draw.
still alot to do on this one.....

cheers,
Rob

[attachment deleted by admin]
« Last Edit: September 10, 2010, 03:53:28 pm by elk country rp »
Logged

Offline aero86

  • Member
  • Posts: 1,263
Re: juniper character bow- rawhide backed
« Reply #1 on: September 10, 2010, 03:56:51 pm »
thats a long piece of juniper  lots pretty good.
Logged
profsaffel  "clogs like the devil" I always figured Lucifer to be more of a disco kind of guy.

Offline elk country rp

  • Member
  • Posts: 228
Re: juniper character bow- rawhide backed
« Reply #2 on: September 10, 2010, 04:51:41 pm »
i put an ellipse on it to see just how uneven it is- i think that once i get the tips to do what i want it just might end up with a purty tiller!

[attachment deleted by admin]
Logged

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: juniper character bow- rawhide backed
« Reply #3 on: September 10, 2010, 05:32:29 pm »
I would say it's perfect right now. Gotta call it quits sometime with the tiller adjustments, or you could lose the purty tiller you already got! :)
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline elk country rp

  • Member
  • Posts: 228
Re: juniper character bow- rawhide backed
« Reply #4 on: September 10, 2010, 05:57:28 pm »
2many- the funny part is- i don't have all that much time into it- maybe 10 hours total so far. i'd like to get an idea of the draw weight & look at the mass formula before i do much more. i suspect it'll have a bit too much mass at the tips as is. i'm stoked you think it's already purty!

anyone know what will happen when i cut holes in the rawhide to match the holes in the bow?

Rob
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: juniper character bow- rawhide backed
« Reply #5 on: September 10, 2010, 05:58:19 pm »
It definately qualifies as a character bow! Pretty tough to get perfect tiller with a bow so full of knots and character. Looks OK to me. I'd leave the rawhide one continuous backing.
Logged

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: juniper character bow- rawhide backed
« Reply #6 on: September 10, 2010, 06:13:03 pm »
Quote from: elk country rp on September 10, 2010, 05:57:28 pm
anyone know what will happen when i cut holes in the rawhide to match the holes in the bow?

Rob

Nothing...I have done it twice on Bows....one Osage....one ERC...and both of them I made it so you could see through the Knottholes....they were fine

And nice Bow Rob...work them Tips a bit more and then just shoot her in....I bet it makes a fine Bow.
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline bcbull

  • Member
  • Posts: 541
Re: juniper character bow- rawhide backed
« Reply #7 on: September 10, 2010, 06:16:02 pm »
very nice bro i like it  as for the holes  it s pretty hard to tiller a jiniper charcher stave anyway  i like it id leave the rawhide as one piece 
 brock
Logged

Offline snag

  • Member
  • Posts: 419
Re: juniper character bow- rawhide backed
« Reply #8 on: September 10, 2010, 08:28:07 pm »
What kind of glue do you use to glue it on with? Do you do it before staining or after?  That is an awesome looking bow! Maybe I should take some meds.....
Logged
Is. 49:2 ....He made me a polished arrow and concealed me in His quiver.

Offline zenmonkeyman

  • Member
  • Posts: 482
Re: juniper character bow- rawhide backed
« Reply #9 on: September 10, 2010, 08:48:08 pm »
I want one!  Where's mine!!???  Coolest stave ever!!
Logged
If the ppl ever allow private banks to control their currency, 1st by inflation, then by deflation, the banks & corporations that will grow up around (these banks) will deprive the ppl of all property until their children wake up homeless on the continent their fathers conquered. Thomas Jefferson

Offline elk country rp

  • Member
  • Posts: 228
Re: juniper character bow- rawhide backed
« Reply #10 on: September 10, 2010, 08:50:50 pm »
thanks guys!

i used knox, sized it twice & wrapped with ace bandages for 24 hours, then unwrapped & let it sit for a week.

i can't resist- i'm cuttin the holes out!

lol- the wisdom of shaping a bow on meds has yet to be determined.....

;)  Rob

& zen, they're all over the place- but if you like, i'll go find one as convoluted as this one for ya!
Logged

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: juniper character bow- rawhide backed
« Reply #11 on: September 10, 2010, 11:34:00 pm »
man that things gnarly i wouldnt know where to scrape , great job!
Logged

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: juniper character bow- rawhide backed
« Reply #12 on: September 11, 2010, 01:07:05 pm »
That is a realllllly nice bow.
No fancy stuff stuck all over it, just let the wood do the talkin'.... great.
Del
Logged
Health warning, these posts may contain traces of nut.

bowkee

  • Guest
Re: juniper character bow- rawhide backed
« Reply #13 on: September 11, 2010, 01:23:09 pm »
nice work :)
Logged

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: juniper character bow- rawhide backed
« Reply #14 on: September 11, 2010, 01:28:32 pm »
Exellent work on that. Gad you ae feeling well enough to do it. Thank God. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!
Pages: [1] 2
« previous next »