Primitive Archer
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Calendar
Login
Register
Primitive Archer
»
Main Discussion Area
»
Bows
»
time for steam bent wood to dry
« previous
next »
Print
Pages: [
1
]
Author
Topic: time for steam bent wood to dry (Read 9246 times)
0 Members and 1 Guest are viewing this topic.
d frana
Member
Posts: 23
time for steam bent wood to dry
«
on:
July 07, 2010, 07:27:49 pm »
Yesterday I did my first steam bend. I bent recurves on a roughed out vine maple bow and now I need to let it dry good before I do more shaping and tillering. I figured on waiting a month. The woods about 1/2' thick. How long is long enough?
Logged
sonny
Member
Posts: 742
Re: time for steam bent wood to dry
«
Reply #1 on:
July 07, 2010, 07:33:29 pm »
A week is probably plenty. waiting a month can't hurt.
also, however counter intuitive it may seem steaming actually dries wood significantly. your wood will need to rehydrate not dehydrate......
Logged
Never argue with an idiot. They'll drag you down to their level and beat you with experience.
Josh
Member
Posts: 3,367
Silence is golden but duct tape is silver.
Re: time for steam bent wood to dry
«
Reply #2 on:
July 07, 2010, 07:36:23 pm »
I agree with sonny about needing to rehydrate. usually a week is enough time. Was the vine maple already seasoned or was it still green when you steamed it?
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln
KenH
Member
Posts: 247
The Kilted Cook
Re: time for steam bent wood to dry
«
Reply #3 on:
July 07, 2010, 09:34:12 pm »
It's not drying that matters after steam bending. It's cooling. Once cooled to ambient temperature the bend should be set.
Logged
You Kill It - I Cook It!
Ken Hulme,
The Kilted Cook Personal Chef Service
d frana
Member
Posts: 23
Re: time for steam bent wood to dry
«
Reply #4 on:
July 08, 2010, 06:43:43 pm »
I'm sure it was good and dry. I had it stored indoors more than 2 years as a roughed out stave. The humidity here lately has been around 95% so it shouldn"t take too long.
Logged
Gordon
Member
Posts: 3,299
Re: time for steam bent wood to dry
«
Reply #5 on:
July 08, 2010, 11:55:28 pm »
I resume tillering after waiting about 24 hours after steaming. I've steam bent a lot of limbs and handles and have never had a problem doing that.
Logged
Gordon
Print
Pages: [
1
]
« previous
next »
Primitive Archer
»
Main Discussion Area
»
Bows
»
time for steam bent wood to dry