« previous next »
Pages: [1] 2

Author Topic: Ring Violation?  (Read 3188 times)

0 Members and 1 Guest are viewing this topic.

Offline hillbilly61

  • Member
  • Posts: 893
  • Fly straight and true
Ring Violation?
« on: March 21, 2010, 09:08:46 pm »
At what point is the ring violated on the osage? Can you round the edges w/o violating it? Also the varnish that's used to seal the back, can it be sanded off? 
Logged
I will say of the Lord,"He is my refuge and my fortress;
  My God, in Him I will trust."  Psalm 91:2

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Ring Violation?
« Reply #1 on: March 21, 2010, 10:24:29 pm »
You mean rounding the edges on the back may violate a ring. You don'y need to round the edges that much. Is the varnish in the ring yo want for the bow? Remember you have to chase to heartwood ring. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Ring Violation?
« Reply #2 on: March 21, 2010, 11:14:30 pm »
If you can sand the varnish off without violating a ring then yes. If you sand through in one small area, you have to take off the entire ring. Rounding the corners should not be a problem as long as it is only the very edge.
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline hillbilly61

  • Member
  • Posts: 893
  • Fly straight and true
Re: Ring Violation?
« Reply #3 on: March 22, 2010, 12:31:24 am »
 Just to take off the sharpness of the back edge. It is the bow you saw in my other post. I would like to get the varnish off so I can stain it with tru-oil. But if it meens ruining the bow (since it is tillered and shootable) then I'll just live with it, unless y'all have any suggestions.
Logged
I will say of the Lord,"He is my refuge and my fortress;
  My God, in Him I will trust."  Psalm 91:2

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Ring Violation?
« Reply #4 on: March 22, 2010, 12:55:17 am »
   What you just want to change color.If so sand it and back it with thin raw hide or something.Unless you really sand it the tiller shouldn't change.If it dose touch it up.
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: Ring Violation?
« Reply #5 on: March 22, 2010, 01:05:44 am »
Are you sure that it's Varnish....and not Urethane?? If it's Varnish...there is a great product out there that will cut it off without hurting the Bow....it's called Smart Strip by Peel Away...and it works great.....and it's Biodegradable too....
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline hillbilly61

  • Member
  • Posts: 893
  • Fly straight and true
Re: Ring Violation?
« Reply #6 on: March 22, 2010, 07:56:37 am »
  Not sure. A couple areas have peeled about the size of my fingernail. I'll pick some smart strip and do a small test area.
Logged
I will say of the Lord,"He is my refuge and my fortress;
  My God, in Him I will trust."  Psalm 91:2

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Ring Violation?
« Reply #7 on: March 22, 2010, 08:39:32 am »
    I've seen varnish thats beem but on thick and is old crack up.
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline Eric Krewson

  • Member
  • Posts: 5,432
Re: Ring Violation?
« Reply #8 on: March 22, 2010, 10:35:54 am »
If the finish is shellac, it scrapes off easily with a cabinet scraper with a minimum off wood removal.
Logged

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Ring Violation?
« Reply #9 on: March 22, 2010, 11:23:11 am »
Shouldn't be any problem sanding/scraping it off if you're careful.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline Jesse

  • Member
  • Posts: 2,129
Re: Ring Violation?
« Reply #10 on: March 22, 2010, 02:33:57 pm »
Try acetone. I have had luck removing several different finishes with it.  Do it outside with rubber gloves and lots of rags
Logged
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Ring Violation?
« Reply #11 on: March 22, 2010, 03:21:16 pm »
Personally, I'd live with it rather than mess up a ring. Touch up that spot that's lifting. Tru Oil is not my favorite for waterproofing. It's a good pore sealer for the belly and that's about it. IMHO.  Here's what I do if I'm concerned about the back getting drying cracks. I get the back pristine after floor tillering. Remove the nicks, sand, etc. then spar urethane it as a and leave it. Generally, you only have to worry about drying cracks with black locust, osage and mulberry. Oh, if I have to remove the bark, I'll seal those woods but not on the ring that I want for the back of the bow. That's my stor and I'm sticking to it. Jawge :)
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline hillbilly61

  • Member
  • Posts: 893
  • Fly straight and true
Re: Ring Violation?
« Reply #12 on: March 22, 2010, 10:52:31 pm »
I'm just gonna live with it and seal it. what about waxing the belly?
Logged
I will say of the Lord,"He is my refuge and my fortress;
  My God, in Him I will trust."  Psalm 91:2

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Ring Violation?
« Reply #13 on: March 22, 2010, 11:10:01 pm »
hillbilly, this osage right? 3 coats of Tru Oil seals up the belly  pores nicely. Then you can spray on a finish. I like spar urethane. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline coyote1956

  • Member
  • Posts: 53
Re: Ring Violation?
« Reply #14 on: March 22, 2010, 11:49:28 pm »
ring violation question,   on Osage  is this  when you scrape or cut or gouge clean through a ring into the next one or just scrape or gouge into the one your on, but not through it into the next layer? Thanks,  Ken 
Logged
“A peculiar virtue in wildlife ethics is that the hunter ordinarily has no gallery to applaud or disapprove of his conduct. The ethics of sportsmanship is not a fixed code, but must be formulated by the individual, with no referee but the Almighty.” Aldo Leupold

Old Town, FL.
Pages: [1] 2
« previous next »