« previous next »
Pages: [1] 2

Author Topic: HELP WITH BOW DYING  (Read 5707 times)

0 Members and 1 Guest are viewing this topic.

Offline okiecountryboy

  • Member
  • Posts: 502
HELP WITH BOW DYING
« on: March 12, 2010, 05:19:48 pm »
What is the best mix with rit dye and achohol for decorating bows?

Ron
Logged
God, honor, country, bows, and guns.

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: HELP WITH BOW DYING
« Reply #1 on: March 12, 2010, 05:31:04 pm »
when I did mine, I just mixed DENATURED alcohol with the rit dye and stirred briskly.  I had to keep adding the alcohol to the dye because it would evaporate leaving the dye sludge in the bottom of my cup.  Are you using the powdered rit dye?  Thats what I did and it turned out pretty cool. 

http://www.primitivearcher.com/smf/index.php/topic,18372.0.html

Good luck on yours, hope it turns out awesome.   :)
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: HELP WITH BOW DYING
« Reply #2 on: March 12, 2010, 05:32:16 pm »
 That's how I do it also, just keep stirring and adding alcohol.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Grunt

  • Guest
Re: HELP WITH BOW DYING
« Reply #3 on: March 12, 2010, 05:36:37 pm »
You might want to test dye a piece of scrap before you hit your bow. You can dye it twice to make it darker but once it's dark it's hard to make it lighter. Have fun!!!
Logged

Pdwight

  • Guest
Re: HELP WITH BOW DYING
« Reply #4 on: March 12, 2010, 07:19:03 pm »
I'm facing a problem that this might relate to, I glued my limb tips on last night...I used Epoxy and now where the limb tip meets the Bamboo there is some epoxy.....the epoxy will not accept dye will it ??

What to do ???

I don't want to sand the bamboo down too much.

Dwight
Logged

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: HELP WITH BOW DYING
« Reply #5 on: March 12, 2010, 07:49:01 pm »
are you talking about excess glue that squeezed out of the joint or are you talking about glue that filled a gap between the boo and the overlay?  If it is just excess glue, I usually just scrape it off with a really sharp knife... Just get the knife under the epoxy and sometimes it just pops off in one large chunk...  :)
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Pdwight

  • Guest
Re: HELP WITH BOW DYING
« Reply #6 on: March 12, 2010, 08:11:39 pm »
The excess glue from clamping, Thanks I will try that
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: HELP WITH BOW DYING
« Reply #7 on: March 12, 2010, 08:14:30 pm »
 A razor blade will get you closer, if you are carefull.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Pdwight

  • Guest
Re: HELP WITH BOW DYING
« Reply #8 on: March 12, 2010, 08:30:36 pm »
Man....that worked like a charm....almost too good....I hope the Epoxy hold's the Ebony tips on  ???
Logged

Offline okiecountryboy

  • Member
  • Posts: 502
Re: HELP WITH BOW DYING
« Reply #9 on: March 12, 2010, 08:45:28 pm »
I was planning on using powdered dye.
Thanks as always. You folks are a boat load of knowledge!!
By the way, bout half done with my first bow. I am SOOOOO addicted.
My heartfelt thanks to my freinds at PA!!!!!

Ron
PS I will be having questions on gluing on tips to my red oak. Be patient, I'm trying to learn quickly. Lots of trial and ERROR. ;D >:( >:( ;D
Logged
God, honor, country, bows, and guns.

Pdwight

  • Guest
Re: HELP WITH BOW DYING
« Reply #10 on: March 12, 2010, 08:50:22 pm »
I glued mine on last night.......UGLY

But they are about 90% sanded right now and look pretty good. I have some pics....amazing what a belt sander can do  ;D
Logged

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: HELP WITH BOW DYING
« Reply #11 on: March 13, 2010, 12:15:12 am »
Quote from: Pdwight on March 12, 2010, 08:50:22 pm
I glued mine on last night.......UGLY

But they are about 90% sanded right now and look pretty good. I have some pics....amazing what a belt sander can do  ;D

YES my belt sander is my favorite tool i own.  It is from the 70's or 80's and it was missing a power cord and a on/off switch when i got it so I just straight wired a new cord on it.  To turn it on and off you have to plug/unplug it.  But boy will that thing shape some wood!  It's awesome.  My two main tools are my belt sander and my drawknife.  I use my drawknife for everything I don't use the belt sander for.  :)
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Pdwight

  • Guest
Re: HELP WITH BOW DYING
« Reply #12 on: March 13, 2010, 01:02:25 am »
I am getting near the stage where I am going to be adding some color to the bamboo backing, does Rit Dye work as well as Leather Dye ??

I will have to order the Febings Dye but I can get Rit dye locally.

Thanks
Dwight
Logged

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: HELP WITH BOW DYING
« Reply #13 on: March 13, 2010, 01:12:35 am »
I would use the ritt dye with denatured alcohol, just remember to lightly sand the shiny rind off the bamboo first or the dye won't stick.  dont sand down too far or you will cut into the power fibers of the boo.  just sand enough to make it not shiny anymore.  I use 120 or 160 grit sandpaper for this.   :) good luck
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline okiecountryboy

  • Member
  • Posts: 502
Re: HELP WITH BOW DYING
« Reply #14 on: March 13, 2010, 01:19:57 am »
I would kill for a belt sander. Need to save for one. My 3 main tools are a jig saw, hunting knife, and a mouse sander...you got it, a lot more time in crafting. I take a positive look at it though......THE ZEN OF BOW MAKING..... ::) ;D ;D ::)
WHAT IS THE BEST GLUE AND WOOD FOR PUTTIN ON NOCK TIPS?

THANKS AGAIN
Ron
Logged
God, honor, country, bows, and guns.
Pages: [1] 2
« previous next »