« previous next »
Pages: [1] 2

Author Topic: Hickory-Backed Ipe R/D (first attempt)  (Read 7999 times)

0 Members and 1 Guest are viewing this topic.

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Hickory-Backed Ipe R/D (first attempt)
« on: November 16, 2009, 11:48:31 am »
This is my first attempt at a laminate bow.  Hickory backed Ipe with Ipe and Hickory tip overlays.  Alternating Ipe and Hickory for the handle riser. 50lbs @ 28".  62" NtN.  I think it turned out okay for my first of this design.   This thing is stinkin fast too.   I ran into a few problems with it like the handle riser popping off.   I thought I left the ipe thick enough in the handle area to keep it from bending but I was wrong.  Next one I will put a tapered piece of wood in between the backing strip and ipe.  So I had to dowell it and wrap it to keep the handle on but after 200 or so shots it has held and shows no sign of coming off again.  Thanks for looking.   :)  -josh









« Last Edit: November 16, 2009, 05:23:07 pm by Josh »
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline Hoot

  • Member
  • Posts: 23
Re: HBI R/D (first attempt)
« Reply #1 on: November 16, 2009, 11:58:30 am »
I think you did a fantastic job.  A real fine bow.   Sounds like with the experience you already are figuring out what to do next.  Is the handle radiused or is it flat?
A radius in the handle may help to keep it from popping off too, but a flat riser with a "power lam" may still want to pop too.....
Logged

Offline Dean Marlow

  • Member
  • Posts: 531
Re: HBI R/D (first attempt)
« Reply #2 on: November 16, 2009, 12:39:18 pm »
Good job for your first glue up. It looks like your bow is doing of it's bending right out of the fades on your full draw picture. It may be just the angle of the picture. Next time try to get a little more bending on the outer half of your limbs. Thanks for sharing.
Logged

Offline zeNBowyer

  • Member
  • Posts: 649
Re: HBI R/D (first attempt)
« Reply #3 on: November 16, 2009, 01:20:05 pm »
Go  Southpaw:)
Logged
"There's  something  immoral  about  abandoning  your  own  judgement"
Cowards always run in  packs
Ishi did not become the arrow, I suspect. The arrow became Ishi.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: HBI R/D (first attempt)
« Reply #4 on: November 16, 2009, 01:23:07 pm »
 Nice looking bow.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: HBI R/D (first attempt)
« Reply #5 on: November 16, 2009, 01:24:53 pm »
thanks for the replies guys.

The bow does look like it is bending too much at the fades, but from the midlimb on to the tips is curved out and in the full draw pic it straightens out so I thought it was doing its fair share of the work, but this is my first attempt.  How much should it bend from mid limb then?   It seems that any more than just straight would be bending too much to me.  and yes zen, completely left handed, lol.     :)  -josh
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline ricktrojanowski

  • Member
  • Posts: 2,064
  • Worlds Greatest Deer Repellent
Re: Hickory-Backed Ipe R/D (first attempt)
« Reply #6 on: November 16, 2009, 08:48:55 pm »
Josh Nice job, looks like a speedy bow to me. 
Logged
Traverse City, MI

Offline Jesse

  • Member
  • Posts: 2,129
Re: Hickory-Backed Ipe R/D (first attempt)
« Reply #7 on: November 16, 2009, 09:19:56 pm »
I'm sure that is a fast bow you made there ;). Looks real good too.  The bending might be a tad focused on a short area but I also noticed that it retains good reflex when unstrung so I say great job 8)
Logged
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Rich Saffold

  • Guest
Re: Hickory-Backed Ipe R/D (first attempt)
« Reply #8 on: November 16, 2009, 11:51:43 pm »
Frankly I like that tiller ;D If these bows  bend too much in the outer limbs than they are just sorta fast.. How they shoot, the limb movement, and the set they take is what I base tillering these bows on...

Looks real good Josh, and sometimes these bows really like to bend through the grip because of how they tiller out so they need a bit more mass there to resist it.. ;) 

Rich
Logged

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Hickory-Backed Ipe R/D (first attempt)
« Reply #9 on: November 17, 2009, 09:45:37 am »
Very fine looking bow. Thanks for sharing it with us.
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline Okie

  • Member
  • Posts: 601
    • Bear Creek Selfbows
Re: Hickory-Backed Ipe R/D (first attempt)
« Reply #10 on: November 17, 2009, 11:35:41 am »
Great job on your first lam. I think a power lam would solve your handle problems.
Logged
Take a kid huntin' (If not who'll drag your deer out when you get old)
<---------<<<Founding Member Oklahoma Selfbow Society>>>-----------> Vice President OSS

Offline OldBow

  • Member
  • Posts: 2,216
  • I'm just an old retired biology teacher.
Re: Hickory-Backed Ipe R/D (first attempt)
« Reply #11 on: November 17, 2009, 11:40:48 am »
Great bow and bookmarked for Nov BOM Laminates
Logged
When you're retired, every day is Saturday

Offline medicinewheel

  • Member
  • Posts: 3,629
Re: Hickory-Backed Ipe R/D (first attempt)
« Reply #12 on: November 17, 2009, 01:43:20 pm »
Nice bow!
Logged
Frank from Germany...

Offline bigcountry

  • Member
  • Posts: 841
Re: Hickory-Backed Ipe R/D (first attempt)
« Reply #13 on: November 17, 2009, 05:58:14 pm »
I know you guys know what your doing but it just scares the life out of me seeing that much bend right out of the fades.  I think it would be hard for me to tiller a heavy R/D bow. 

Good job.
Logged
Westminster, MD

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: Hickory-Backed Ipe R/D (first attempt)
« Reply #14 on: November 17, 2009, 10:17:02 pm »
thanks everyone.  my next one will bend more mid-limb, have a deflexed handle, and a power lam.  :) :) -josh
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln
Pages: [1] 2
« previous next »