« previous next »
Pages: [1] 2

Author Topic: Tri-lam bamboo bulletwood ipe R/D  (Read 6013 times)

0 Members and 1 Guest are viewing this topic.

Offline snedeker

  • Member
  • Posts: 907
Tri-lam bamboo bulletwood ipe R/D
« on: September 04, 2009, 11:48:24 am »
This tri-lam was made from a 5/16 bulletwood (Massaranduba) core provided to me by Matt Simpson (Huntersim), boo strip, and a 1/8 strip of ipe.  I pretapered the bulletwood, glued to boo in form, tillered, added belly ipe strip, etc.  It is 63# ntn, 50# at 28", 1 1/8 inch wide at fades.  Has a foot long 1/8 piece of goncalo alves in center as power lam, and handle built of thin gonacalo and ipe stips.  Bocote tip overlays in tribute to David Knight.  Hemp grip wrap and deco limb wraps.  Drawn by my son.  TB3 glue used on all glue-ups. Tru-oil finish.  I should have got it down lighter in draw weight before putting the ipe strip on the belly, cause I had to take a lot of ipe off - ended up a little lighter than the goal of 58-60, but the  lad pulls around 50 so it will be good for him. Great shooting bow. 

Alreay have another one onderway, thins time a 4-lam with 1/8 stirps of BL and ipe scraps as core to get ipe belly. 

Dave

[attachment deleted by admin]
Logged

Offline DanaM

  • Member
  • Posts: 9,211
Re: Tri-lam bamboo bulletwood ipe R/D
« Reply #1 on: September 04, 2009, 12:00:14 pm »
Thats a beauty Dave :)
Logged
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline knightd

  • Member
  • Posts: 1,392
    • www.primalneedarchery.com
Re: Tri-lam bamboo bulletwood ipe R/D
« Reply #2 on: September 04, 2009, 12:02:12 pm »
love the profile.. bet it shoots sweet..
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Tri-lam bamboo bulletwood ipe R/D
« Reply #3 on: September 04, 2009, 12:36:00 pm »
Nice bow, Dave and the tiller looks good.  Good work as always.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline PeteC

  • Member
  • Posts: 2,014
Re: Tri-lam bamboo bulletwood ipe R/D
« Reply #4 on: September 04, 2009, 01:06:19 pm »
Nice bow Dave!! Do you degrease all laminations before glue-up with TB3?  God Bless
Logged
What you believe determines how you behave., Pete Clayton, Whitehouse ,Texas

Offline snedeker

  • Member
  • Posts: 907
Re: Tri-lam bamboo bulletwood ipe R/D
« Reply #5 on: September 04, 2009, 01:16:50 pm »
Pete, I give everything a quick but hard wipe with thinner.

Dave
Logged

Rich Saffold

  • Guest
Re: Tri-lam bamboo bulletwood ipe R/D
« Reply #6 on: September 05, 2009, 12:52:19 am »
Looks good Dave. I too really like this type of outer limb profile as well...
Logged

Offline medicinewheel

  • Member
  • Posts: 3,629
Re: Tri-lam bamboo bulletwood ipe R/D
« Reply #7 on: September 05, 2009, 04:07:05 am »
Looking good!
Logged
Frank from Germany...

Offline OldBow

  • Member
  • Posts: 2,216
  • I'm just an old retired biology teacher.
Re: Tri-lam bamboo bulletwood ipe R/D
« Reply #8 on: September 05, 2009, 12:28:18 pm »
Great Bow, Dave!! You've got to be proud of this one 8). Super candidate for Sept Laminate BOM fun, too.
Logged
When you're retired, every day is Saturday

Offline snedeker

  • Member
  • Posts: 907
Re: Tri-lam bamboo bulletwood ipe R/D
« Reply #9 on: September 06, 2009, 03:06:44 pm »
Couple buddie and me out splitting bulletwood.  Nice clean split, eh?

Dave :o

[attachment deleted by admin]
Logged

radius

  • Guest
Re: Tri-lam bamboo bulletwood ipe R/D
« Reply #10 on: September 06, 2009, 03:11:56 pm »
cool logs
Logged

Offline macbow

  • Member
  • Posts: 54
Re: Tri-lam bamboo bulletwood ipe R/D
« Reply #11 on: September 06, 2009, 09:10:15 pm »
Dave, When you tillered the bamboo and bullet wood did you just work the sides to keep the belly flat for the Ipe glue up?
Ron
Logged
Ron Mackenberg   Warsaw, MO.

Offline snedeker

  • Member
  • Posts: 907
Re: Tri-lam bamboo bulletwood ipe R/D
« Reply #12 on: September 07, 2009, 10:37:51 am »
I tillered the belly, carrefully keeping it flat.  Sanded it with a block
Logged

Offline Jesse

  • Member
  • Posts: 2,129
Re: Tri-lam bamboo bulletwood ipe R/D
« Reply #13 on: September 07, 2009, 12:10:08 pm »
cool bow. I like the cordage wrap as well. That must have been hard work splitting that big log out in that hot jungle. ;D
Logged
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Offline snedeker

  • Member
  • Posts: 907
Re: Tri-lam bamboo bulletwood ipe R/D
« Reply #14 on: September 08, 2009, 09:32:24 am »
I set it up with about 1.5 inch reflex at the tips and it settled at 1 inch deflex
Logged
Pages: [1] 2
« previous next »