Primitive Archer
Main Discussion Area => Arrows => Topic started by: ricktrojanowski on November 26, 2008, 08:34:18 pm
-
Just interested in what everybody's opinion is on the best finish for boo arrows. I'm working on some and was hoping to get some ideas.
-
I like mine au natural! I have used Tru-Oil. Pat
-
I'm liking Tru-oil more all the time-tough, easy and effective. The natural rind on cane/boo is a pretty good finish in itself, but I usually smooth the nodes down and often sand the rind so that I can dye or paint the shafts, so I usually slap some finish on there.
-
I've been leaving mine natural other then the sanded nodes where I covered them with Tru-oil. :)
-
I've been playing with sanding both the nodes and the outer rind off, then using a wipe on poly to seal the shaft. Mainly because I have had a hard time using duco or fletchtight to glue on feathers. I have mostly used fletch tape in the past. I have never been able to get any glue to stick to natural cane. What do you guys use?
-
Rick I'm working on some also, sanded the nodes and rind off then 5 or 6 coats of tru oil with fine
steel wool inbetween :)
-
Natural and tru oil here.
Tracy
-
Seems like tru oil is the way to go. I sanded the nodes and rind off as well. Then dyed one with water based aniline dye. So i'll give the tru oil a go. Thanks for the help.
-
i use a massey finish on several of my sets. it is almost impervious to the elements. i lost a cane arrow for over a year. found it one day looking for another arrow. the bugs had eaten the fletching but the shaft was in perfect shape.
-
Chris, Do you dip or wipe? :o ::)
ps. I put the mag in the mail today!
-
I like to use tongue oil, the type you brush on, then wait about 6 to 7 minutes and wipe off with a rag.
(http://i47.photobucket.com/albums/f165/ROY-CHRIS/2007arrows024.jpg)
-
I leave mine alone ,or stain them .These are poke berry stained.
(http://www.freebirdarchery.com/images/poke-fletches.jpg)
Ralph
-
pat, i use a 1" foam brush to put my massey finish on. i tried a bristle brush one time but it left streaks in the finish. if you have a couple arrows to finish, the five minute epoxy and alcohol works great. they are ready to fletch in 15-20 minutes. if you have a full set then the two ton epoxy will works better but takes a while longer to cure. one coat is all i usually use but applying a couple coats of massey finish will leave a diamond hard finish that is slick as two eels getting it on in a bucket of snot.
-
Cheapshot, I've been doing some sanding on the fletching end and then some fletching glue (not fletch-tite, can't think of the name). I also have left a 1/8" or so of the quill exposed on each end and sinew wrapped. This has worked pretty good although I've had a couple of feathers still lose their bond with the cane but stay on due to the sinew wrap.
Talking with Sawfiler a couple of weeks ago, he sands the cane on the feather end, wipes with denatured alchohol, and then uses super glue. No sinew wrapping and hasn't had any problem with feathers falling off. Not the most primitive, but it works and yields a good hunting arrow.
-
Thanks Greg, I have some super glue gel I have been wanting to try. I'll try sanding the fletch area, and an alcohol wipe.
-
Two eels and a bucket of snot, now that IS SLICK! :o
-
I have had good luck with poly over dye, using ducco on the fletch.
So which fletch glue works best with tru oil? I'm not good at tying feathers on yet and I'm giving tru oil a try on my set that I'm making right now....Terry
-
I've used fletch tape and Duco on Tru-Oil. Pat
-
I use Duco for any finish. That stuff sticks to anything. Just give plenty of time to let it set before removing the clamp. I usually wait 20 mins or so.