Primitive Archer

Main Discussion Area => Bows => Topic started by: whitewoodshunter on August 30, 2008, 03:41:14 pm

Title: pyramid board bow???
Post by: whitewoodshunter on August 30, 2008, 03:41:14 pm

I was gonna try something new. I am going to try a pyramid  board bow.The wood is  3/4 inch/3 red Oak. Any suggestions on the dimensions.I was thinking 68 ntn 2 inches wide at the fades to 1/2 tips.And around fifty pounds.

Title: Re: pyramid board bow???
Post by: Sidewinder on August 30, 2008, 04:01:52 pm

That sounds good to me. See what the more experienced say though. Hope it works out.   Danny

Title: Re: pyramid board bow???
Post by: Pat B on August 30, 2008, 05:12:37 pm

I made a hickory backed red oak pyramid bow a few years ago that shoots like a champ. It is 64" t/t, 2 1/4" at the fades and tapering to 3/8" tips. She is 53#@28".      Pat

Title: Re: pyramid board bow???
Post by: whitewoodshunter on August 30, 2008, 08:52:17 pm

Well I had to settle with 1 inch/4/60. I hope  this will still work. The wood is red oak. Not sure of what dimensions to use, or if I should make a stiff handle or "d" bow style?

Title: Re: pyramid board bow???
Post by: roofus on December 16, 2008, 01:36:40 am

Quote from: Pat B on August 30, 2008, 05:12:37 pm

I made a hickory backed red oak pyramid bow a few years ago that shoots like a champ. It is 64" t/t, 2 1/4" at the fades and tapering to 3/8" tips. She is 53#@28".      Pat

Any pics?

Title: Re: pyramid board bow???
Post by: Auggie on December 16, 2008, 04:51:44 pm

I made a redoak board bow from the left overs, its 60 ntn,7/8 wide limbs,30lbs at 28. And i backed it with cloth,had to make it pink for my daughters B-day. So far it anly has about 1.5 inch of set,and shoots good. So I dont see why your pyramid wont work at the numbers you gave.

Title: Re: pyramid board bow???
Post by: George Tsoukalas on December 16, 2008, 06:21:22 pm

I don't know what this means.
"Well I had to settle with 1 inch/4/60."
If you plan to narrow the  handle anymore than 1.5 in. you will have to glue on a additional handle piece.
Jawge

Title: Re: pyramid board bow???
Post by: whitewoodshunter on December 16, 2008, 08:15:37 pm

1 inch thick 4 inches wide and 60 long. I glued on some 4 inch bamboo pieces to beef up my handle area.This thread is old , back in September. the bow I made from it has already taken a deer. The bow was called my little red oak killing machine.

Title: Re: pyramid board bow???
Post by: whitewoodshunter on December 16, 2008, 08:16:20 pm

The limb thickness at the fades was 1.75 inches.

Title: Re: pyramid board bow???
Post by: salad days on December 17, 2008, 01:29:21 pm

i made a hickory backed/ red oak pyramid last winter but it cracked while shooting in. Broke my heart too cuz it was FAST and accurate. It was 1.5 wide at the fades down to about 7/16 nocks. It was 61" NTN. I didn't realize at the time that I was being a little too ambitious for the skills I had.

Title: Re: pyramid board bow???
Post by: david w. on December 18, 2008, 03:01:05 pm

I mad a 65 1/2" ntn red oak pyramind bow it pulls #40@ 26"  Made a niced, fast, sweet shooting bow.  it was 2" wide tapering to 1/2"

Title: Re: pyramid board bow???
Post by: TheWildCat on December 26, 2008, 09:13:44 pm

I made a pyramnid bow from Red Oak board. It shoots  great.   66" t/t..2 3/4" wide at the fade..3/4" at the tip. I love it.

TheWildCat