Primitive Archer
Main Discussion Area => Bows => Topic started by: bigcountry on June 06, 2008, 02:56:58 pm
-
Ok, so I bent wood for the first time last night. ;D I took my osage bow that had some prop twist in it, and steamed 15" of it and pulled a tip ~1.5" to line up with other tip and handle and put some reflex in the tip, maybe 1.5" or less because of about 1.5" of string follow I had. So the string follow I had is now negated.
Everything looks good, but in the steaming process, the wood on the belly seemed to raise its grain alot. I will have to resand it. Is this normal? Second, how long should I wait to retiller it? I still have to reflex the tip on the other limb tonight and only will reflex, no pulling the tips to one side.
Thanks,
Mark
-
yes, it's normal for steam/water to raise the grain of wood. In fact, when doing final sand, i always wipe the bow with a damp cloth between grits, to raise the grain and get the finest possible finish i can
as for when to tiller it: WAIT!!!! WAIT a month. Do something else. Go camping. Take a vacation. Build 3 more bows. But don't start stressing that limb until it's damn good and dry.
-
hmm, summer time in MD, average humidity around 60-75%, it could take a while. Unless I put it in a heat box.
-
yeah,and get a fan blowing past it, too, to lift away the moist air...works beautifully
-
Being osage I wouldnt wait a month. ::) Maybe a week tops. Osage doesn't hold moisture like white woods do. Yes a heat box would help speed up the process.
-
Well, I still need to add antler to the tips, and add snake skin backs, So I have alot of stuff I can do for the next few weeks before bending again. I know I should wait to add the snake skin until its tillered but I figured it won't hurt.
Thanks,
Mark
-
Unless it breaks or something and you just ruined your skins. I never put the "purties" on until I'm sure I have a solid shooter.
-
Once you add the skins you have also added more moisture. I had an osage bow that went from 55# at my draw to less than 45# after skinning it(TB glue). After about 2 weeks, it was back up to 55#. Pat
-
So actually it would be best to tiller after the skins are put on? Is my way of thinking right?
-
only if you are 100% confident that you can tiller the thing without ruining it. I agree with who ever said the frills are for when the bow is done.
-
I don't add any decorations to a bow until I have shot it quite a few times. I don't even make a handle or thin the tips until I shoot an arrow or two out of it. I want to be sure everything is working properly, that the string lines up through the handle and that I have good early draw weight. Before then it is just a "potential" bow and not worthy of it's "Sunday go to meetins"...yet! Pat
-
only if you are 100% confident that you can tiller the thing without ruining it. I agree with who ever said the frills are for when the bow is done.
Well, the bow was done, but then I figured I wanted to experiment with bending and straightening. So now I have done both limbs, I figured its going to have to be tillered again. And shot again.
Thanks for the advise, no reason wasting some good skins if i break it.