Primitive Archer
		Main Discussion Area => Bows => Topic started by: Selfbowman on May 14, 2025, 02:53:10 pm
		
			
			- 
				Wel I don’t have a light bow to shoot so   Had this stave with some wiggle so here goes. First heat  session done and getting to floor tiller 
			
 
			
			- 
				Second heat session limbs about 1-2” thick.
			
 
			
			- 
				What draw weight are you looking for on this one?
			
 
			
			- 
				Oh about 35-38#. My personal bows don’t stay around long.🤠🤠🤠
			
 
			
			- 
				Lookin good Arvin.  Love a little wiggle.  
			
 
			
			- 
				Looking good Arvin, nice looking stave.
 Pappy
			 
			
			- 
				How wide you got it? 
			
 
			
			- 
				1-5/8 at fades 67”ntn  Kevin. Well tip overlays on and third heat straighten session. Back finished except for light sanding. Now nocks and tiller. 
 
			 
			
			- 
				Pic 
			
 
			
			- 
				40@26
			
 
			
			- 
				Pic
			
 
			
			- 
				Well, you didn't waste any time did you Arvin? Where's the full draw? You know the rules, you can't post a bow and not do a full draw. 
			
 
			
			- 
				Ya he did get That strung up quick.  I bet he could do it blindfolded 
			
 
			
			- 
				I can’t do a selffy and pull the bow. You think it bends good Kevin?🤠
			
 
			
			- 
				
I can’t do a selffy and pull the bow. You think it bends good Kevin?🤠
Gee Arvin, I can't tell at all ;) cell phones have timers, or you can make video then pause it and take a screenshot. Just saying, you have options  )P(
But yeah, that brace profile looks smooth..
			 
			
			- 
				Gee Kevin you know this old cowboy can’t do any of that ona flip phone.🤠🤠🤠
			
 
			
			- 
				Looks nice Arvin.  After fighting set on similar length and widths bows previuos, I am curious if this one had any set?
Did you pull it to 28?
How thick do the limbs mike out at?
			 
			
			- 
				
Gee Kevin you know this old cowboy can’t do any of that ona flip phone.🤠🤠🤠
Well Arvin, I guess you can send it to me, I'll take the picture for you :D
			 
			
			- 
				Ya Willie it took about 1” set. Was not concerned about it on this one. It bends good Kevin. 
			
 
			
			- 
				
Ya Willie it took about 1” set. Was not concerned about it on this one. It bends good Kevin.
I know it does, just messing with you cowboy 🤠 
I am surprised with it taking set, any idea why?
			 
			
			- 
				Must be the guy that tillered it.🤠🤠
			
 
			
			- 
				Everyone needs a bow that they can shoot lots of arrows from.  It's a perfect weight Arvin.  It has just enough squiggles to make it cool, but not so much to make extra mass and soil the shooting characteristics.  Congrats!   :OK
			
 
			
			- 
				
Must be the guy that tillered it.🤠🤠
Nah, must have been something wrong with the wood. 
			 
			
			- 
				Nice wiggles man!  you got her lined right up too!
			
 
			
			- 
				Looks good Arvin, don't take you long to turn out a bow.  :)
 Pappy
			 
			
			- 
				Very nice bow, Arvin!
			
 
			
			- 
				Looks good Arvin. Reminds me of the wiggly blank you sent me. 
I agree with Bob’s assessment 
Bjrogg 
			 
			
			- 
				Thanks guys.