Primitive Archer
Main Discussion Area => HowTo's and Build-a-longs => Topic started by: Don W on October 29, 2021, 09:54:09 pm
-
details of the build https://www.diy.timetestedtools.net/diy-hunters-pack-seat/
There are a few pack seats on the market, but they’re very pricey, and although I didn’t buy any of them, I had concerns about each one. I tried to avoid those concerns in my design, however, my design required it meet my ability to built it both in skill set and equipment needed.
It took a couple of iterations to get to the final design. That may be clear in some of the esthetics.
(https://www.diy.timetestedtools.net/wp-content/uploads/2021/10/Pack-Frame-Seat-19.jpg)
(https://www.diy.timetestedtools.net/wp-content/uploads/2021/10/Pack-Frame-Seat-17.jpg)
(https://www.diy.timetestedtools.net/wp-content/uploads/2021/10/Pack-Frame-Seat-8.jpg)
-
Very very nice! i might make it! it doesnt seem too difficult.... but we'll see.
-
Very very nice! i might make it! it doesnt seem too difficult.... but we'll see.
It's pretty easy. First iteration only took about an hour. It took a little tweaking but not much.
-
I like it alot
my only concern is that where the front leg is attached to the flat the flat is engraved and this could be a weak point
-
I will test it. May be it is a frame for a survival back pack (the luxus version) ???
-
If you are thinking of building one, look at this version as well, https://www.diy.timetestedtools.net/diy-hunters-pack-seat-take-two/
(https://www.diy.timetestedtools.net/wp-content/uploads/2021/11/Hunting-Pack-Seat-1.jpg)
-
I like them.