Primitive Archer

Main Discussion Area => Arrows => Topic started by: Sammakesbows on June 07, 2020, 09:05:29 pm

Title: What hardware store lumbers are good for arrows?
Post by: Sammakesbows on June 07, 2020, 09:05:29 pm

I heard that Douglas fir sold at hardware stores have too low of a ring count for arrows. Is this the case with other lumbers? What lumbers can i use? Is it different if i use lumber from lumber yards? I know that when there is a fire, people cut up and take the unburnt lumber here in California, but can anyone just do that?

Title: Re: What hardware store lumbers are good for arrows?
Post by: Pat B on June 07, 2020, 09:24:27 pm

Probably any straight grain lumber will make good arrows. Poplar is one of my favorite and I've used black walnut too. Cherry, hickory(heavy), spruce, fir, white pine, and more.

Title: Re: What hardware store lumbers are good for arrows?
Post by: Sammakesbows on June 07, 2020, 11:10:08 pm

Quote from: Pat B on June 07, 2020, 09:24:27 pm

Probably any straight grain lumber will make good arrows. Poplar is one of my favorite and I've used black walnut too. Cherry, hickory(heavy), spruce, fir, white pine, and more.

So its just Douglas fir that doesnt work?

Title: Re: What hardware store lumbers are good for arrows?
Post by: Hawkdancer on June 07, 2020, 11:31:29 pm

Pat B has fir on his list, are you looking for dowels or lumber to trim down?  Look for straight grain regardless of species. 
Hawkdancer

Title: Re: What hardware store lumbers are good for arrows?
Post by: Pat B on June 08, 2020, 06:12:53 am

What Hawkdancer said.   :OK

Title: Re: What hardware store lumbers are good for arrows?
Post by: mullet on June 08, 2020, 08:02:05 am

Straight grained White Pine works great.

Title: Re: What hardware store lumbers are good for arrows?
Post by: Strelets on June 09, 2020, 01:14:23 pm

If you want the highest spine to weight ratio, use spruce or pine. This will give you a fast but fragile arrow that will very probably snap if it glances off a tree or target. If you want a robust arrow that will survive a lot of abuse, use ash.

Title: Re: What hardware store lumbers are good for arrows?
Post by: aznboi3644 on June 25, 2020, 06:34:15 am

I have made arrows with pretty much whatever 5/16” or 3/8” straight grained dowels they have.  I like 5/16” oak dowels.  They are very tough. I have a whole lot of I don’t know what but they fly well.  My 3/8” pine arrows fly well also.  I have some heavy 3/8” oak arrows waiting for testing. But I need to make a heavier bow for them or sand them down some.