Primitive Archer
Main Discussion Area => Bows => Topic started by: bassman on July 06, 2019, 07:32:39 am
-
Bow is 50 inches nock to nock, and draws 44 lbs, at 22+ inches.I show a patch in the riser to plug the only ant hole that was left after finished. This stave ran In all kinds of directions, so I tried to heat treat it in to submission the best I could.I am happy I got a short bow from it, because I was going to throw it away.The bow will stay natural, and finish will be linseed oil,and bee,s wax, and no handle wrap.
-
Sweet... I like 'em clean, plain and simple.
Del
-
Nice looking little stick...Are those pin nocks?
Don
-
Thanks Cat. No Don not pin nocks ,but very close.
-
Very nice little bow bassman. :OK 8)
-
Very nie save and die tiller on that. Jawge
-
Nice little bow Bassman. That HHB can really be frustrating to try straightening. Sometimes it's even more stubborn than me.
Bjrogg
-
Thanks Pat, George, Brogg.All that stave would give in length was 51 inches.Now I will shoot the heck out of it, and see what happens. Nothing ventured nothing gained.Pics aren't the best.
-
Cool bow. If it were mine I'd name it "The Angry Ant".
-
Nice shorty! The bend looking good!
Nice save also!
Congrats martin
-
Thanks Hamish, and B2W, it took a lot of work to get it finished.
-
Very nice! Much better use for the wood than ant food :)
Mike
-
Nice bend on that shorty.
-
Another nice bow, Bob. You have a knack for those shorties. I think Hamish nailed the name perfectly.
-
Sweet... I like 'em clean, plain and simple.
Del
x2