Primitive Archer

Main Discussion Area => At the Forge => Topic started by: TRiggs on January 30, 2019, 11:08:48 am

Title: Knife #8
Post by: TRiggs on January 30, 2019, 11:08:48 am

I finished this knife the other day and made a stand for it so I can get a good picture this is my idea of a Camp/Bush knife, 1095 high carbon full tang 7" blade from tip to guard, brass fittings and Bocote scales, the sheath is from EBay.

Title: Re: Knife #8
Post by: osage outlaw on January 30, 2019, 12:21:33 pm

 Very nice work.   I like those scales.

Title: Re: Knife #8
Post by: KHalverson on January 30, 2019, 04:16:11 pm

looks good.

Title: Re: Knife #8
Post by: Trapper Rob on January 30, 2019, 07:09:08 pm

You do nice work.

Title: Re: Knife #8
Post by: Hawkdancer on January 30, 2019, 11:08:50 pm

Looks like a working knife to me!  Good job!
Hawkdancer

Title: Re: Knife #8
Post by: Pappy on January 31, 2019, 05:27:25 am

Nice one, great job. :)
 Pappy

Title: Re: Knife #8
Post by: TRiggs on January 31, 2019, 12:08:18 pm

Thanks Guys I have been working hard with the hammer to forge a knife that is almost finished and only cleaned up with a sander that is why you don't see the bevels they are forged into the blade and not made with a grinder or sander.