Primitive Archer
Main Discussion Area => Bows => Topic started by: bassman on January 01, 2019, 01:24:31 pm
-
Has any of you built edge grained bows, if so could you please post a picture?
Thanks so Much-Bob
-
I made this one but it's maple backed so it might not be what you're looking for.
https://www.primitivearcher.com/smf/index.php/topic,63436.msg891294.html#msg891294
-
Those are some really nice bows. Thanks for the pics.
-
No, thats what I was looking for. I just finished an edge grain Black Locust bow, but it has horizontal knots on the back. I have shot it about 20 times, and it did not let go, but it will. I was thinking about flipping it over and bamboo backing it. The other side only has knots at the fades. Should I just try and back it the way it is?
-
I think I would put the worst side against the backing. The backing would take all the tension so you might as well use the best wood for the belly. You should wait for better advice about what backing to use for Black Locust as I have very limited experience with BL.
-
I have sinew backed black locust with hide glue with good results,but they had nice chased rings with no violation of the back. Right now I am out of sinew.I know if the bamboo backing is to thick it will crush the belly of the bow.I was thinking of a thin veneer of it. Thanks Bob.
-
Maple, hickory or elm will make good backings for your bow and like DC said, put the knot under the backing.
Will you post pics of your stave(bow) and the knot?
-
Pat I am just new to this sight ,and right now I would need my son or daughter to get pics up. Thanks for your help. I can get my hands on some hickory for backing . I will try that.
-
bassman!
Welcome to PA.
I saw those photos.
For those who have not, there are knots (forget how many) that go across the width of the bow in that the knots have not been accounted for by leaving the width wider there.
You essentially have made a board bow and board bows do not function well with knots. I had a hickory board bow break at a tiny pin knot I didn't see when selecting the board.
You could back it with rawhide but honestly you are taking a chance when shooting it.
Jawge
-
Hey George, how are you. Just wanted to hear what the guys on primitive had to say about it.Thanks
-
I believe the vast majority of board bows and bow backings are made from edge grain.
-
I believe the vast majority of board bows and bow backings are made from edge grain.
I'm surprised to hear that. I knew backings were edge grain but it never occurred to me that board bows would be too. It only makes sense but it just never crossed my mind. First new thing I've learned this year. Good start :) :)
-
I’ve made a bunch of edge grained ash bows backed with red oak and several edge grained Osage from a timber hauled out of a barn in Indiana. I’ve backetd the Osage with linen, hickory, bamboo, and sinew. It works fine; especially the ash. I would tell you that the Osage edge grained bows feel less lively than the stave bows I’ve made from Osage in the conventional manner but they are durable and respectable shooters.
-
Nice to see you here on PA Bassman. You'll fit right in.
Bjrogg
-
Generally all of the edge grain backed edge grain bows I made seem to all end up with narrower lighter massed limbs than my self bows.
-
Bassman, I'm good. Happy New Year!
Plain sawn, quarter sawn and rift sawn boards will make bows. My favorite is rift sawn.
On a board, 1/4 sawn needs straight edge grain with no run outs. With the other 2, a run out or 2 per limb is fine.
Jawge
-
I have built 6 Sudbury bows edge grain,and they are still going strong. Just thought I would take a shot at some bad locust to see if I could get a bow out of it. Some times it works and other times not so much. It came out with no set, and shoots nice so I am not ready to give up on it quiet yet. I will back it with vertical grain hickory and see how it works.Thank you all for your input.Bob
-
Why are you going to back it if it came out with no set and shoots nice. A backing will create an entirely new bow.
-
Badger , I don,t think it will hold up with edge grain with horizontal knots going across the back of the bow in few different places, but it would stand a chance if I back it.I know when you build , you build with good woods. Some times for the halibit I try to make a functional bow with what ever wood I have.I have learned a lot from you ,and other guys on here.Thanks
-
A knot across the bow may be a death sentence. Hard to deal with that kind of knot.
-
A knot across the bow may be a death sentence. Hard to deal with that kind of knot.
I wasn't aware of the knots