Primitive Archer
Main Discussion Area => Around the Campfire => Topic started by: DC on August 16, 2018, 12:10:58 pm
-
Does anyone know if there is a way to get the staples out of one of these? I've had this thing for 40 years and I've never been able to get them out. It's a real pain when you shoot a few of one size and then want to change. I saw a video that says you can't get them out but I can't imagine them building something like that. I've shot an awful lot of staples into the garbage.
-
I don't see the spring plunger that keeps the staples pushed up into the magazine.
The staples usually get wedged in between the firing pin and side walls.
They can usually be removed by taking off C clip. Clear gun of staples before
inserting ones of different length
Zuma
-
It's not jammed or anything. I can shoot all the staples and then put in more but there doesn't seem to be a way to get any unused staples out.
-
They should slide out like they slid in. :-\
-
Made in Canada eh'? :)
-
I think that's ya know eh'?
Bjrogg
-
Made in Canada eh'? :)
Nope eh! I had to look and see. :D I can just make it out Bostitch T5 made in the United States of America.
-
I found it!!!! You have to push on the "hammer" and they pop out in your hand. I only use it to put new covers on my targets but it was a pain not knowing how to get them out. I had poked and prodded around that area but just never pushed it the right way. I guess 71 isn't too late to learn stuff. Almost, but not quite. ;D ;D
-
Glad you figured it out DC, ya know eh'
Bjrogg