Primitive Archer
Main Discussion Area => Bows => Topic started by: Yellowstave on April 24, 2018, 07:22:07 pm
-
This guy is 70 inches ttt. Pulling 60 lb at 24 inches here in pic. I wanted yalls opinions before i finish it out to 27 inches. Thanks fellas!
-
It looks like the last eight inches of that right limb could bend more. Lol looks great bro
-
That right limb has been screwin with me for a while today.
-
More
-
left limb looks perfect, yellowfeller's right about the right. :D
-
Your tiller shape should match your front profile. Right now you have more of a circular bend, which would be appropriate for a pyramid profile. You should have more of an elliptical bend for the alb profile you have on this bow.
-
Also when making stiff handled bows, your fades shouldn't end so abruptly, they need taper out further.
-
Your tiller shape should match your front profile. Right now you have more of a circular bend, which would be appropriate for a pyramid profile. You should have more of an elliptical bend for the alb profile you have on this bow.
+1
-
Id like to see the first 8-9" off the grip move more, both limbs.
-
That's a tough tiller. It is hard for me to see what is going on in that right limb.
It does not appear that mid limb to nocks is moving but I can't tell for sure.
But it needs to and you need to watch that area closely.
Left limb looks good. The rest of the right limb looks good.
Jawge
-
Yes george. That area may indee a tad stiff but it is moving. I was trying ro be super mindful of that area because of the wave right there. Thats why im consulting the pros.
-
hard to tell but have you rounded the limbs yet? the edges look pretty sharp. you'll lose a good bit of poundage rounding everything so keep that in mind. cool looking stave though