Primitive Archer
Main Discussion Area => Bows => Topic started by: stuckinthemud on April 20, 2018, 12:38:02 pm
-
Hi guys,
This is a 7-foot length of close-grained yew-branch, 4" diameter, narrow sap-wood, lovely dark colour and close-grained, but, there is a great big knot right at the centre - actually there is a large knot every 2 feet. Is there a bow here?
(https://stuckinthemudsite.files.wordpress.com/2018/04/img_20180420_172630-e1524246175161.jpg)
(https://stuckinthemudsite.files.wordpress.com/2018/04/img_20180420_172811.jpg)
-
It's really tempting to photoshop a line between the two ends in the first photo, and say "right here!" However, that would be silly, so I will let someone who has actually worked yew answer the question. It seems like I have seen some pretty knotty yew bows though. Bryce had one a couple of years ago, but the photos have fallen victim to PhotoBucket. The one in the second photo doesn't look that big from here.
-
Well, it's got to be reflexed or deflexed so if you sight down the back or belly are there any knots in the way? Said another way are there any knots on the inside or outside of the curve?
-
That's the only knot I have concerns about, the rest can be designed out - I'm likely going for a D-bow
-
I can't tell where the knot is. Top pic, two inches in from the left?
-
Top picture, just next to the highest part of the curve, almost dead centre. There is a similar knot about 8" from the right hand end but I think that will tiller out as it would end up under the nock
-
Can't see it. Are you making a deflex or reflex bow? Try and make it from the inside or outside of the bend. If you make it a little off one way or the other you end up with a sideways bend that can be a real pain to deal with.
-
It looks like the second photo is a closeup of the same knot, but I see the one you mean. I am trying to finish up an osage D bow with a knot in almost the same location. I ended up putting it right at the top of the grip, which is surprisingly comfy, and a good grip indicator if I don't use a handle wrap. It shouldn't bend much there if the knot has to stay. Could you avoid it if you made a slighter narrower and thicker handle that still worked a smidge?
-
I'm no yew expert, but I can't see why not. If that was a plum branch that fat, I could maybe pull TWO narrow/deep staves out of it.. Lots of straightening to be done, I guess.
And if all else fails, cut out the knot and splice some billets.
-
What's stopping you from making a bow with a static handle? I mean if the knot in question is dead center and the stave is 7 feet long...
Looks like there's natural deflex around that knot so if it were me I'd make a D/R bow with a static handle. Maybe even loose the sapwood and back with sinew. I bet then it would hold the profile really nicely.
-
There's nothing stopping me making a stiff-handle bow, but the level of straightening needed would be more straight forward with a narrow bow. Equally, as this is branch-wood and contains tension wood I can't split out two narrow laths side by side as I need to use the centre to keep things stable. I had pulled it out of the pile to cut up for other projects, but I can't quite bring myself to do that and if you guys think there's a bow in there then I'l rough it down to a stave and see what happens.
-
Frankly, I'd pass. Too much work.
It's not the knot. Too much straightening.
Is that a reflex situation or a sidewise bend?
Jawge
-
This is one of those cases where you have to look long and hard to see what kind of bow you can get. It looks like a deflexed stave, so maybe a reflex reflex bow. Kind of a high crown so you might consider a bend through the handle. Yew is not critical about chasing rings so you might consider flattening the back and leaving it wider around the knots. I think knots are best drilled out and left open and just letting the wood swirl around it like it does naturally.
-
There's got to be a bow in there. It may take a little to chase it out but branch wood makes nice bows. If you can find a route through the knots a little steam(maybe a lot of steam)and time and a bow will emerge. I'm sorry I couldn't see the knots and be more help. Working a stave like that will teach you lots. I like staves like that cause it slows me down and the pile of finished bows doesn't get so big.
-
The stave is deflexed and is a little snakey with sideways bend as well, it also has about 90 degrees of twist
-
If this where my stave, and trust me I’ve used plenty like this. I would cut out the reflex stave and it’s gonna spring into more reflex. Steam it out till you have around 4” of reflex. Deflex the handle just a hair and continue on:)