Primitive Archer
Main Discussion Area => Bows => Topic started by: Titan_Bow on March 25, 2008, 03:36:13 pm
-
I have a line on a Harbor Freight 14" woodworking bandsaw at a really good price. I am wondering if this saw is going to be work for roughing out staves etc. I have an old 9" saw, and it doesnt work well at all. Is a 14" saw big enough? I am not sure the motor size on this saw, and I cant find it on their website. Anyone have this saw?
-
Size ain't everything :D 14" is big enuf more to the point is the horsepower adequete
-
With the right blade and proper tuning, it should work fine for roughing out bows.
-
Like Gordon said. I think getting the right blade is more important than what saw you use. Justin
-
Also, take the time to learn how to set your saw up properly, makes all the difference in the world and only takes a few minutes. Steve
-
Fourteen inch saw is a good saw if it is that tall stand up model they have ,I have a fourteen inch saw and it works great but it is a Industrial sheet metal,metal ,and wood saw with a gear box on it.but you still have to have the right blade to cut with.
Dennis
-
Like everybody said, the blade is most important. Also, like Badger said, a properly tuned saw will cut faster, cleaner, easier, and the saw will last longer.
-
Howdy Titan,
Generally speaking, I have never bought anything of Quality from Harbor Fraught.
As for your bandsaw question, I have a 10" bandsaw that I do a good amount of work with. So, I have to agree with these guys in saying that a well tuned machine, with the correct (new) blade is the way to go.
Get yourself a book on Tuning Your Baldsaw, it'll show you how to set the tension and to set up those guides - that really helps.
Good Luck,
Canoe
-
I have that exact saw.What the guys are telling you is exactly right.Has to be properly tuned and It seems to do best with a stout blade.I have benn using re-saw blades and that works real well.I sawed some 7 foot long black locust staves in half lengthwise with it and it did fine,gotta make sure you don't try to feed it through too fast,slow and easy and it cut straight. Frank
-
how much are they asking? Grizzly makes a nice one for cheap.
-
I believe the question you are asking is if the price is right and thats what you can afford it will probably be a good saw
Dennis
-
I bought the 14" saw from Grizzley,sorry about that.I buy alot of stuff from harbour freight and got confused there.I have not bought any machines from H.F. Anyway,the 14 inch saw I have has a 1 H.P. motor and that seems plenty. Frank
-
Frank, Most of my power equipment has come from Grizzly and IMO they sell excellent stuff at a relatively reasonably price. They also have all the parts you may ever need and a great tech support department. I have never bought anything from HF so I can't comment on any of their products. Pat
-
It'll work fine if you take your time and split your staves down to a managable size first before you go crazy with the saw. Your not going to be able to cut super thick unsquared stave. I split all mine down to about two inches thick and try to square it up (with a draw knife) to the table before I begin cutting.
-
I was just there - it has a 1hp motor . Looks decent - but never have bought any power tools from them - but if your only using it for bow making - it will probably do the job .
-
Titan, I have one, as long as you don't use too fine of a blade, get the speed up and go slow it works great, my opinion is, if you're gonna make lots of bows save your money and buy a better saw, I only rip about 8-10 bows out of staves a year and it works fine for me. I haven't replaced any guide blocks on it so I don't know if I can get parts or if other model parts will work, The assembly manual is not very good either. But you can't beat the price, I think I paid $240 on sale. I run a 3/4 tooth and 3/4 inch wide blade.
VB
-
I have one that I bought from a guy that bought it at an auction to resell. It was like new (not sure it was ever used before!!) I paid $175 and it hasbeebn sawing what I want to saw.
Again the right blade is important. I have tried 4tooth per inch but seem to have better success with 6 tooth per inch.