Primitive Archer
Main Discussion Area => Bows => Topic started by: loefflerchuck on September 27, 2017, 11:23:13 am
-
I got this stave a while back from Marco(Dubois). It was a great stave but my shop is so dry and hot in the summer it developed a little dogleg I removed with dry heat. When I got it to floor tiller I heat treated the belly to the point of a little charring and a wonderful smell. I love this wood and want more. It gives off a wonderful smell while working it too. It developed a little set but considering it is 59" ntn and 1 5/16" at the widest spot, I don't think it's bad for 51#@27". when it's resting on it's belly the handle is still the lowest contact.
A tad over 59" ntn. Fast flight string. Tips are buffalo horn with bighorn sheep horn over that. Bison handle, sinew sewn. Old piano key handle pass I got from Clint(Osage Outlaw). sealed with 5 coats of tung oil. 51# @ 27". I've found these sharp recurves add a bit to a bow like this. I know arrow speed is not everything but I like to test it anyway. I used regular target arrows of poplar and maple for the test(same arrows as one of the photos). I threw out the highest and lowest shots. 472 grain arrow all the rest of the shots were between 175-187fps. 602 grain arrow 161fps average. I tried a cedar flight type arrow I made 413 grains drawn 25.5" with a weight of 45# and got over 200fps.
-
Sorry photos are not great. Still need to figure out the new compression site.
-
Forgot to say it's almost center shot arrow pass.
-
That photo makes it look like a flat spot on the top limb, so here is the other side full draw
-
Very nice bow Chuck. By far my favorite style, simple, nice short curves, and not over 60". Perfect.
-
Very nice bow Chuck. I love the smell of HHB toasted in the morning. It really is a great smell and it really seems to like a heat treatment. Glad to see another HHB fan.
Bjrogg
-
Really nice bow! Love the horn combo on the tips. Recurves are my favourite and this is my kind of bow. Impressive how you guys make them so short, have to try that soon because it looks great!
-
Not too shabby for a simple horn bow builder :)
-
Wow very nice bow, nice tiller and fast too! Did you have difficulty with the wood for the recurves? Can you explain a bit more what method you used? I have heard before that HHB is not the easiest to recurve, but then I might be wrong since I have never tried it. Also I would be interested to hear more details on how you heat treated the bow. I have never tried it and would like to try it on one of my HHB bows soon.
All my bows are made from HHB from my own bush. I am like you, I love to work with the wood and its snow white colour is beautiful!
-
Pretty much up to your usual standards with this one. Which is to say a cut above most! She's a beauty and ought to throw a heck of a lot of arrows over her lifetime with reasonable care and feeding!
-
Not too shabby for a fresh self bow.Like the contrasts of color.Nice work!!!
-
Nice curves on that one. And those arrow speeds, dang!
Gotta love it.
-
Man, you did that HHB justice! By far my favorite smelling wood, especially when heat treating. I really dig the tips. (-S
-
Very nice looking bow
-
Great job on that one. That looks like a very nice piece of HHB.
I've had a lot of HHB under my heat-gun, it is one of the best species for heat-treating
-
Awesome job! Like everything about that one!
-
Beautiful bow those tips really look sharp.
-
Great looking bow, Chuck. I'd like to try out some HHB soon. My dad lives around some in Wisconsin now, I might have him cut me some staves and ship them out to me.
-
Very nicely done😊
-
Looks great. I like those tips. Hophornbeam is good bow wood.
-
Mighty fine looking bow you built there.
Really like the bends
DBar
-
Beautiful bow, very nice in all aspects. :)
Pappy
-
That turned out great, sounds like quite the performer
-
Real nice! How long did it take start to finish?
Hawkdancer
-
Thanks everybody. Looks like I'm late to the party and many of you already know this wood well. Philipp, I did these recurves with grease and a heat gun. I got a tiny bit of cracking on the belly but that was removed for the finished bow. Because of what I had read from Marc, I did all the bends with dry heat. I think like hickory, hhb may be a great bow in the dry climate here. Hawkdancer, I'm not sure. I work on a lot of bows at one time and have found it impossible to keep track. I like to take my time with all bows and being able to pick up another bow makes that easy.
-
Great bow Chuck, masterfully work like usual.
I always thought HHB is boring white, but this shows nice colors and grain on the belly.
-
Well now Chuck,
I'm glad you ended up with that stave. Gives me something to shoot for with what I still have. Love how you got that dark grain into the tip area. Man that's sweet!!
Marco
-
Beautiful bow and great job all around
-
Really good detail on the build and beautifal job!##
-
Had to come back and look again and realized how far that inner dark grain goes up the limbs. Love it Chuck.
-
Great bow and a very nice tiller, Chuck. Jawge
-
Nice Chuck,
Like the idea of posting both sides at full draw...Bend looks balanced in your hands...
Don